GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Dalo Harkin on 04 July 2012, 09:07

Title: Which TIP
Post by: Dalo Harkin on 04 July 2012, 09:07

which TIP do people use when running a K03s and a 3'' MAF?

Title: Re: Which TIP
Post by: pickles on 04 July 2012, 11:39

usually a silicone TIP m8 ie forge, just make sure you get the right 1 for your engine, you may need to block off some holes as i did if your on an AGU

(http://www.forgemotorsport.com/images/products/FMA4B6IND.jpg)

Title: Re: Which TIP
Post by: DunnDeal12 on 04 July 2012, 11:42

just use x2 80-70mm reducers for either side of the maf then a 70mm aluminium coupler to connect the tip.

Title: Re: Which TIP
Post by: Dalo Harkin on 04 July 2012, 13:20

Quote from: DunnDeal12 on 04 July 2012, 11:42

just use x2 80-70mm reducers for either side of the maf then a 70mm aluminium coupler to connect the tip.

this was my plan, but as I havent bought the silicone TIP was wondering if there was one with a 3'' end, cheers

Title: Re: Which TIP
Post by: jamie1989 on 04 July 2012, 13:28

No unless its custom made you wont get one that 3inch.
Just use joiners I assume thats what others do and its what im goin to do.

Title: Re: Which TIP
Post by: DunnDeal12 on 04 July 2012, 15:03

or you could buy one of these http://www.creationsmotorsport.com/product-detail.php?pid=421 and get a aluminium part machined to fit the turbo.