GolfGTIforum.co.uk

General => General discussion => Topic started by: cullygti on 22 June 2012, 14:22

Title: xbox 360
Post by: cullygti on 22 June 2012, 14:22
hi guys got a spare xbox 360 that had the red ring of death iv managed to fix that with the repair kit etc now it has 1 red light and an error code e75 anyone had this and did you fix it cheers guys
Title: Re: xbox 360
Post by: clipperjay on 22 June 2012, 16:39
Just google it must be loads of dead Xbox 360's
I did know a young lad bought three for £10 took them apart and made a working one  :shocked:
http://xbox-experts.co.uk/errorcode/E75/1023/ (http://xbox-experts.co.uk/errorcode/E75/1023/)
Quote
Details
Primary Error code:   1 red lights 1 RLOD
E-Code / Secondary Error code:   E75 / 1023
Binary/Hex:   01001011 / 0x4B -> 75
Known fixes:

1) Connect the DVD-drive and check if the error code is still the same...
2) Remove everything you might have soldered to this area.
3) Reflow the Southbridge and Networkchip ...
4) Replace the Networkchip
Related Errors:
Powered by Xbox-experts.com
No Related Errors available!
Description:

This error is related to the network chip, might be power related or so.This can happen while installing and NME 2.
In general it sounds like a cold solder joint somewhere there.However it can also be a Hitachi DVD-drive that is not connected...
According to XBH: Couldn't read ethernet phy vendor/wrong ethernet vendor
References:
No References available!
Title: Re: xbox 360
Post by: cullygti on 22 June 2012, 20:29
cheers jay iv had a lil browse and sort of made some sense but im not upto scratch with all this tech stuff so was hoping someone had had similar problem that they fixed and give me a bit more of an idea what im doing  :wink:  :grin: