GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: Gash on 21 June 2012, 17:50
-
right its time for me to ask one of these questions haha.
well as i said in the other thread iv got an issue with the engine and am thinking of 20v my car.
Bit newer engine and less miles than mine.
anyways i know what parts i need etc (luckily only a few because iv got a 16v)
but iv seen this engine (comes with a delocked ecu with remap which is good)
http://www.ebay.co.uk/itm/MK4-GOLF-1-8-GTI-AGU-ENGINE-WITH-TURBO-ECU-AND-CLOCK-/170861736971?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27c827340b
but say it doesnt have bits like water pump, alternator etc etc (all the small things that attach on the engine) can i use the ones that are on my abf?
-
can't use those ABF parts, but those bits are not expensive or hard to source
-
right cool. suppose not my mates always breaking mk4s sure i can get bits off him!
i was looking at around 600 for the engine and unlocked ecu, will just have to see if i can get this cheap... although its 250 miles away from me! lol
-
right cool. suppose not my mates always breaking mk4s sure i can get bits off him!
i was looking at around 600 for the engine and unlocked ecu, will just have to see if i can get this cheap... although its 250 miles away from me! lol
Got everything engine with everything on it, gearbox and heaps of bits i dont even need for £400 in the end :evil:
-
my mates for the engine ecu and everything i need and said i could have it for 300 but im looking for an unlocked ecu now
-
right cool. suppose not my mates always breaking mk4s sure i can get bits off him!
i was looking at around 600 for the engine and unlocked ecu, will just have to see if i can get this cheap... although its 250 miles away from me! lol
That's nothing I'm looking at an engine thats over 600 miles away from me. :laugh:
-
my mates for the engine ecu and everything i need and said i could have it for 300 but im looking for an unlocked ecu now
Can allways just get the ECU unlocked
-
how much is that normally?
-
I got my ecu, mapped immob defeated and the unnecessary stuff mapped out, all for £200 :smiley:
-
Just as easy to code a key.
Wouldnt pay more than £500 for a full conversion now. prices are sooo cheap.
-
encode the key?
im around the 700 mark, thats for everything i need and fitting
-
That's cheap!
I've just spent £900 on my kart :laugh:
I'm still looking for a 4motion only want to pay £1500 for the car then hoping to get half that back with the parts I don't want/need.