GolfGTIforum.co.uk

General => The garage => Topic started by: Adam-D on 14 June 2005, 14:58

Title: engine mount question
Post by: Adam-D on 14 June 2005, 14:58

mk2 16v k jet

there are 2 bolts tha hold the starter on right.
is there another bolt that sits next to the lower on that goes throu the engine mount bit?
cos i think mine is missing

if so what size is it an ill find one

Title: Re: engine mount question
Post by: AudiA8Quattro on 14 June 2005, 17:53

There are 3 bolts, 2 go through the starter motor.
They ALL bolt on to a bracket that is attached to the front engine mount.
So if you want to remove the starter motor, you will need to support the engine.
This gay design was modified for the mk3 golf  :laugh:

See my link, go to how to guides for more info.

Title: Re: engine mount question
Post by: Adam-D on 14 June 2005, 18:55

so is there 2 long bolts and 1 short?

Title: Re: engine mount question
Post by: Andy Mc on 14 June 2005, 20:56

I think that right as I changed my starter motor a few years ago and am pretty sure that there were 2 long bolts and a short one.

Title: Re: engine mount question
Post by: ...joe on 14 June 2005, 21:49

yep two long, one short.

Title: Re: engine mount question
Post by: Adam-D on 14 June 2005, 23:07

right i need the short one then  it appears its missing  :shocked:

off to scrappy tomorow then