GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Dalo Harkin on 18 June 2012, 12:42
-
Do the 1.8T just have the 1x lambda sensor :undecided:
I have been needing to do mine for a while and am getting everything else ready for the FMIC and K03s :evil:
-
iirc i think it has one in front of the cat and one behind? could be wrong though :embarassed:
-
mine is throwing one code, time to find out which is knackered then :smiley:
-
Our ARZs have the 2 sensors. What's the code?
-
Cant remember the code it was picked up while getting it remapped and recommended to be changed and that was ages ago, car gets used about 100 miles a month if that so not that rushed for doing it
-
I have a AUQ and it has pre and post cat lambda sensors, easy to check have a look underneath floor just about in line with the seat and you will see a black box, see if you one or 2 wires going into it.
-
If looking for after cat one have one done 100mile bosch selling if req'd, Misdiagnosis so stuck with it.
-
If you have 2 lambda are the front and back not the same fitting/type
-
I had this problem they are both different they have different connectors on them too!!! And when trying to find the correct part no about 5 different ones come up!!!
-
Do you have the part numbers then or where you got them?
I only think that one of them is gone, so other than process of elimination findout out which has gone :sad:
-
Bosch ones from a motor factors only thing is scan it to see if it's Pre or post cat, will narrow it down a bit, will try and find pn on recipt later otherwise I still got the box at my old dears haha