GolfGTIforum.co.uk

General => The garage => Topic started by: lemski on 08 June 2012, 19:24

Title: mk3 gearbox flang to mk4 gearbox
Post by: lemski on 08 June 2012, 19:24

Hi, do the 02j flanges come out? I think that's what gearbox is. Its out of an early a3 turbo. I need to know so I can get my mk2 back on its wheels. Cheers all

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: clipperjay on 08 June 2012, 19:30

With the 1.8t there are 2 flanges available either 100mm or 108mm, if its 100mm all is well mk3 shafts vbolt up. if 108mm then you need to swap the shafts for early 02j or 02a. there are 2 types of flage bolt in and clip in just need to get the right type

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: lemski on 08 June 2012, 19:34

Al measure tomorow jay. I owe u a pint wen I see u at a show. 4 reg means early dunt it?

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: clipperjay on 08 June 2012, 19:35

Might do as 2000 onwards is considered early so 2004 would be check if its a clip or bolt type fella?

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: lemski on 08 June 2012, 19:40

What u mean clip or bolt. If it helps its bolts up as mk3s do, but has m10 heads instead of m8

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: clipperjay on 08 June 2012, 20:01

Two type of flanges I think ones is plastic one is metal the metal type should be bolt so when you order one for that box mention its a bolt type! But we need to defo find out total length of the drive shaft to confirm its 100mm type?
 

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: lemski on 08 June 2012, 20:04

Ill find out tomorow and I will txt you buddy. I owe you jay

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: F17BAD on 09 June 2012, 14:34

early 20vt, will be 100mm bolt in type

Title: Re: mk3 gearbox flang to mk4 gearbox
Post by: lemski on 09 June 2012, 17:28

Sorted it now. Didn't even change the shaft