GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Chris#101 on 05 June 2012, 16:53
-
So the time has come to finally book my car in with R-Tech for a stage 2 custom remap :cool:
Anyone want to play 'guess the expected figures' ?? :tongue:
The spec is
* 2003 AUQ180
*87k miles
*K03s
* Momentum 99' RON fuel
*DEVILSOWN 6-30 PSI W.M.I kit
*CRAFT '42 3" turbo back non res exhaust system
*TOYOSPORTS C.A.I
*TOYOSPORTS F.M.I.C
*FORGE T.I.P
*FORGE actuator yellow spring
*FORGE 007P (soon to have)
*PCV simplified - oil catch can
*N249 valve delete
-
221bhp
-
Depends how much Nick wants to push it?
Could easily see 245bhp from those if you wanted.
-
Depends how much Nick wants to push it?
Could easily see 245bhp from those if you wanted.
That would be awesome :cool:
From looking at others specs and figures I had in my head high 230's!
When you say 'Depends how much Nick wants to push it' is that being the k03s being the limiting factor or?? :smiley:
-
Limitied factor is how good and in good condition your components are. at 240s bhp, the k03s is at the end of its game near enough.
-
Limitied factor is how good and in good condition your components are. at 240s bhp, the k03s is at the end of its game near enough.
Ahh yer of course im with you! I guess time will tell :cool:
Feeling rather nervous/excited now :sick: :laugh:
-
Done anything with fuelling?
-
Done anything with fuelling?
Not as yet I'm still running standard AUQ 180 maf, pump, injectors and fpr
Although id hate for them too be a limiting factor!?
-
226bhp :smiley:
-
No idea what your injectors are good for but might start to have a weak fuel pump.
-
ide say 230. could see higher but would be pushing the turbo to the limit and if the turbos not sweet could end up in new turbo time.
-
218bhp
-
231
-
233bhp :tongue:
-
240bhp
-
Lots of different thoughts then :laugh:
I wonder whos going to be closest :nerd:
Anyone else feel nervous for remapping?
-
no I just feel nervous when it bounces off the rev limiter on the rollers, I'm always convinced a conrod is going to escape
-
no I just feel nervous when it bounces off the rev limiter on the rollers, I'm always convinced a conrod is going to escape
I wondered what all that soil is underneath the ramps...It's the damn con rods escaping :laugh: :grin:
234bhp...Is there a prize for guessing closest? :evil:
-
236.3 :grin: good luck.
-
i was sooo happy when i reached the 300bhp! i was hoping for 280 :undecided:
i think ur be lucky to get 199bhp :grin: :grin: :grin: :grin: :grin:
-
244.2, kitkat for me when I win please.
-
238.2 :)
-
I'm only saying my figure due to no mention of bigger injectors :wink:
-
I'm only saying my figure due to no mention of bigger injectors :wink:
:lipsrsealed:
Am I right in thinking a larger maf and injectors are hard to get hold of for the AUQ engine?
-
BAM ones isn't it?
Conveniently a set in the classifieds?
-
232 :wink:
-
with possible bigger injectors and MAF I'll say 257 :smiley:
-
231
I was going to say that , I say less first as your have a boost leak , then 228
-
I'm only saying my figure due to no mention of bigger injectors :wink:
:lipsrsealed:
Am I right in thinking a larger maf and injectors are hard to get hold of for the AUQ engine?
The maf is the same sensor (same part number) inside a bam and auq, and I am running bam injectors , on my auq ,
-
I'm only saying my figure due to no mention of bigger injectors :wink:
:lipsrsealed:
Am I right in thinking a larger maf and injectors are hard to get hold of for the AUQ engine?
The maf is the same sensor (same part number) inside a bam and auq, and I am running bam injectors , on my auq ,
So when you say the bam and auq are the same sensor, theres no point in changing it to a bam as there the same size?
WERE THE bam injectors a stright fit to the auq intake manifold, plugs etc etc??
thanks
-
Well thats me booked in :wink:
Watch this space
-
The sensor inside should be the same , same part number but the tubing for the maf are different ,
-
The sensor inside should be the same , same part number but the tubing for the maf are different ,
Different being bigger? :smiley:
Do you think you could respond to my pm when you get a minute, would be much appreciated :nerd:
-
Well well well :laugh:
the figures have been put down and suprisingly someone has got it bang on :cool:
Check out my project page tonight/tomorrow for all to be revealed :drool:
-
Harsh that making us all wait :tongue:
-
bored! of waiting!
-
bored! of waiting!
Tell us know you horrible bastard! :laugh:
:kiss:
-
bored! of waiting!
Tell us know you horrible fatherless son! :laugh:
:kiss:
Not me to tell you.... LMFAO!
-
Spill the beans. Or put it all in a vote so we can try guess the correct figure :laugh:
-
bored! of waiting!
Tell us know you horrible fatherless son! :laugh:
:kiss:
Not me to tell you.... LMFAO!
LOL :grin: :laugh:
Far too many Chris' in this thread!!! :rolleyes:
-
199bhp maxed out during the first 30-40mins of the dyno mapping session....... :embarassed:
Then we find a bolt shot out of a rubber pipe which was held on by a zip tie which was bleeding all the boost off, fixed that and spent another 1hour 20mins mapping and got 2**bhp 2**lbft :wink:
-
199bhp maxed out during the first 30-40mins of the dyno mapping session....... :embarassed:
Then we find a bolt shot out of a rubber pipe which was held on by a zip tie which was bleeding all the boost off, fixed that and spent another 1hour 20mins mapping and got 2**bhp 2**lbft :wink:
That's not fair!!! Let us know :grin:
-
So what's the figure getting boring???? :grin:
-
lost interest now
-
Let's see what it is virtually same spec as mine but I've got huge smic and self tune by me, me against r-tech. Get a rolling road run on it incouple weeks when new wmi stuff fitted. :grin:
-
221.8 bhp
248.6 ft lbs at a guess
-
Sorry guys I was soo tired last night after a long few days and just generally been out enjoying the red i :laugh:
Just updated my project thread :wink:
http://www.golfgtiforum.co.uk/index.php?topic=222223.0
-
199bhp maxed out during the first 30-40mins of the dyno mapping session....... :embarassed:
Then we find a bolt shot out of a rubber pipe which was held on by a zip tie which was bleeding all the boost off, fixed that and spent another 1hour 20mins mapping and got 2**bhp 2**lbft :wink:
Litterialy guys Im a man of very few words so probably didn't show it yesterday but I am soo happy with what you've done :cool:. couldnt stop smiling on the way home :grin: the difference is night and day :smug:. Going to get what you suggested done asap and book another session with you guys to see what she really has to give :nerd: and add the launch control and left foot brake and boost :laugh:. There is a reason why R-tech are so busy, the service is A***
thanks again :smiley:
-
The most important bit cool 231bhp & 258ftlb holding a solid 20spi boost laugh
(http://i1076.photobucket.com/albums/w455/Chriselvinmx/power.jpg)
-
Got boost print out Chris??? Check.it against mine. Good figures them mate.
-
f**k me was i right again :grin:
-
f**k me was i right again :grin:
Only got half right mate!!!! :grin: