GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Scott-R on 04 June 2012, 21:42

Title: R32 vents into a gti?
Post by: Scott-R on 04 June 2012, 21:42

Has anyone fitted r32 vents to a gti? Why doest the switch on driver side fit properly?

Title: Re: R32 vents into a gti?
Post by: Wazzzer on 04 June 2012, 22:08

interior vents? Mine fit perfectly :huh:

Title: Re: R32 vents into a gti?
Post by: cullygti on 04 June 2012, 22:18

i thought they were the same as its the same dash  :huh:

Title: Re: R32 vents into a gti?
Post by: tdi_blu on 04 June 2012, 22:19

Are they not just the same as Bora vents as in different slats and they light up if so they will fit fine.

Title: Re: R32 vents into a gti?
Post by: Scott-R on 04 June 2012, 22:21

My right hand side wont sit flush! No clips are broken its like theres something catching behind it.. Will look again tomorrow!

Title: Re: R32 vents into a gti?
Post by: dom on 04 June 2012, 22:24

There is a little metal clip on either side of the switch, they sometimes slide off when your removing your old switch. Take the switch back out and check to see if yours is still in there, that would stop it from sitting flush :wink:

Title: Re: R32 vents into a gti?
Post by: Wazzzer on 05 June 2012, 09:36

R32 and Bora vents are the same, the R32 ones don't light up though