GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: shaft69 on 25 May 2012, 23:07
-
Anyone tried using above, if so how good is it and is it easy to use??
-
Lemmi what?
-
engine management software...
and im afraid not,
-
My nephew sent over link from states if i knew more about how to use it, set timing up for my water inj.
-
Yes used it, it's a little ltd and only adjusts the adaption channels. You can increase a number of things 14 in total main ones are timing and rpm limit, has idle speeds etc etc. timing wise it adds / subtracts timing across the whole map rather than specific points like a remap would do. But good if you says add an fmic as you can a few degrees timing to make sure of cooler iats. Worth playing with and can be used with cheap eBay cable but it's not a substitute for a remap, I'd suggest it's best for using if you've had a remap and add a few upgrades and want to get a little more I guess you can call it a 1.5 remap if you have a stage 1
-
Yes used it, it's a little ltd and only adjusts the adaption channels. You can increase a number of things 14 in total main ones are timing and rpm limit, has idle speeds etc etc. timing wise it adds / subtracts timing across the whole map rather than specific points like a remap would do. But good if you says add an fmic as you can a few degrees timing to make sure of cooler iats. Worth playing with and can be used with cheap eBay cable but it's not a substitute for a remap, I'd suggest it's best for using if you've had a remap and add a few upgrades and want to get a little more I guess you can call it a 1.5 remap if you have a stage 1
Which cable to be used on fleebay this one??
http://www.ebay.co.uk/itm/Serial-Port-RS232-DB9-OBDII-9-16-Pin-Cable-Lead-027-/230589847032?pt=UK_Diagnostic_Tools_Equipment&hash=item35b039d5f8
-
this might be easier as can use a USB to OBDII / VCDS cable rather than serial port
http://unitronic-chipped.com/main/en/tuning/uni_setting.html
-
im not sure if unisettings only works with unitronic software. either way you need to be confident in your datalogging skills before messing with engine adaptation channels!
-
this might be easier as can use a USB to OBDII / VCDS cable rather than serial port
http://unitronic-chipped.com/main/en/tuning/uni_setting.html
[/qhttp://www.ebay.co.uk/itm/Black-VAG-COM-OBD2-OBDII-409-1-KKL-USB-Car-Diagnostic-Cable-Interface-Tool-UK-/250925077077?pt=UK_Diagnostic_Tools_Equipment&hash=item3a6c4cd255uote]
Also this fleebay one??
-
Like this fleebay usb0obd lead??
http://www.ebay.co.uk/itm/Black-VAG-COM-OBD2-OBDII-409-1-KKL-USB-Car-Diagnostic-Cable-Interface-Tool-UK-/250925077077?pt=UK_Diagnostic_Tools_Equipment&hash=item3a6c4cd255