GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Jin_C on 22 May 2012, 10:21

Title: Replacing AGU gearbox ENJ ECW difference?
Post by: Jin_C on 22 May 2012, 10:21

Hi all,

It seems like the input shaft bearing on my gearbox is on its way out. Whirring noise only when clutch is up, goes away when I push it in.

I called VW with my chassis number and they told me I have an ECW gearbox. I know that the ENJ box has the same ratios, is there any difference in drive shaft flange size and can I buy one of those instead?

Also are there any stretch bolts I need to replace when swapping out the gearbox?

Thanks!

Title: Re: Replacing AGU gearbox ENJ ECW difference?
Post by: Jin_C on 24 May 2012, 10:28

Can anyone help? After further research Ive read that all 02j gearboxes have 108mm flanges. But then I also read that the very early 02js had 100mm flanges.

If anyone else has replaced their AGU gearbox which code did you have and what did you change to?

Title: Re: Replacing AGU gearbox ENJ ECW difference?
Post by: GunnerCP on 24 May 2012, 15:50

No real help but I've got an agu gearbox from my car I'm breaking, don't know what code it is but I'm in west London if you're after one.

Title: Re: Replacing AGU gearbox ENJ ECW difference?
Post by: Jin_C on 24 May 2012, 16:11

GunnerCP you have a PM!