GolfGTIforum.co.uk

General => The garage => Topic started by: Chris619 on 16 May 2012, 15:34

Title: Mapping MBE Engine Management
Post by: Chris619 on 16 May 2012, 15:34

I've got a mk1 golf with a 1.8T BAM engine in, last time it was on the rollers it was only putting out 220bhp and overfuelling alot. It's only used as a track day car it's been sat around all winter and it's about time to get it out again.

Does anyone know of anywhere that custom maps MBE Management in the midlands area, ideally mapping it on a rolling road and able to sort out a little misfire on it aswell.

In antipication of any help and advice,

Thanks

EVERYONE

Title: Re: Mapping MBE Engine Management
Post by: topher on 16 May 2012, 16:14

R-Tech can tackle MBE i believe :afro:

Title: Re: Mapping MBE Engine Management
Post by: RTechUK on 16 May 2012, 18:31

Quote from: topher on 16 May 2012, 16:14

R-Tech can tackle MBE i believe :afro:

:wink:

Title: Re: Mapping MBE Engine Management
Post by: RTechUK on 16 May 2012, 18:38

Which version MBE are you running?  Some can be "live real time" remapped and some can only provide live data logging and cycle stop start mapping.

We can provide a service for both its just time involed which differs.

Nick

Title: Re: Mapping MBE Engine Management
Post by: Chris619 on 16 May 2012, 19:02

It's an MBE 992 ecu and that's about as much as I know, if thats any help.

Would you be able to sort the misfire out to what ever it is.

Title: Re: Mapping MBE Engine Management
Post by: RTechUK on 17 May 2012, 19:46

Quote from: Chris619 on 16 May 2012, 19:02

It's an MBE 992 ecu and that's about as much as I know, if thats any help.

Would you be able to sort the misfire out to what ever it is.

Missfire could be down to the wasted spark coil pack not the ecu or mapping?  If you bring the car to us we can get it testing and running fine before starting the mapping.    I am 90% sure we can sort the missfire as there really aint much to go wrong with the 992 ecu.

The 992 ecu can not be mapped or emulated live so its stop start logging and tuning which takes a lot longer.

Is your system a Qpeng setup??

http://www.qpeng.com/products/vag_plug_and_play_engine_management_kits/18t_20v_plug_and_play_kits.html

Nick

Title: Re: Mapping MBE Engine Management
Post by: scarr89 on 17 May 2012, 19:53

I bet that is good fun to drive  :shocked:

Title: Re: Mapping MBE Engine Management
Post by: Chris619 on 18 May 2012, 09:07

Yeah it's the Qpeng setup I'm running on it. I'm pritty sure the misfire is unrelated to the ecu, but it needs a map aswell to get get the most out of it.

I'll get a trailer or an A Frame sorted so I can get it down to you as it's unbearable to drive on the road. Then give you a call early next week to book it in, so you can take a look and work your magic on it.