GolfGTIforum.co.uk
General => Car audio => Topic started by: monty9120 on 14 May 2012, 20:24
-
hi all whats the best way to route wires for a sub on a mark 4 golf.
the sub will be fitted on the passenger side if that helps
-
Power down one side - amp wires down the other side.
-
i meant into the engine bay
-
If you look in engine bay there's grommets leading to behind glovey and near pedals, as said above power on one side, all trim pops off and rear arch trim has a cap you screw off.
-
i have found the gromet for the wiring loom. just need to wait for the kit to turn up :smiley:
-
I have pictures of this if you need help. Let me know and i'll dig out and post.
Stuart
-
if you have mate, may help others too. many thanks
-
Just realised I have already posted up on MKIVs. Not sure if posting links is against the rules. If so, I apologise, but just trying to help.
http://uk-mkivs.net/forums/p/299960/2221526.aspx#2221526
Another thread from others here...
http://uk-mkivs.net/forums/t/465016.aspx
Stuart
-
click on quote and copy the picture links onto here.