GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: AD1.8T on 12 May 2012, 08:06

Title: Rear beam Done!!
Post by: AD1.8T on 12 May 2012, 08:06: Just about to take the rear beam off but need to know what are the torques the bolts need doing up to so i dont go shreading any of the threads being over cautious!

I sm not looking forward to doing these bushes !
Title: Re: Rear beam torque settings
Post by: Wazzzer on 12 May 2012, 11:15: I'd help you but I'm sat waiting for a ferry at the mo lol

The bushes only take about half hour to beat out if you have the rear beam off the car, just done some on the spare beam I've got in the garden
Title: Re: Rear beam torque settings
Post by: AD1.8T on 12 May 2012, 12:40: Bushes are now out took about 5mins on the second one first took about half hour ..... I had the plastic ones not the metal sleeved ones which was usefull. How do i lone up the vrs ones ?
Title: Re: Rear beam torque settings
Post by: AD1.8T on 12 May 2012, 15:33: Can safely say that was a piece of piss !

Didnt have to disconnect brakes just removed calipers and supported them hole rear beam off first bush took about 20 mins of drilling hitting fire and general bastardisation then we relised they were the plastic sort so the second bush about 5 holes then one the took out part of the plastic outer and it basically fell out!

Putting them in we used a huge g clamp to get them a cm or so in the a couple of hits with a rubber mallet they were in ! Deffinitly a 2 man job we started at half 9 had the beam off and bushes out by 11 went and got the bushes and my mates new steering wheel untill half 12 ish finished at 3 and that was being very laid back about it could easily do it in 2/3 hours

this made a huge mess but was amusing watching it melt away minimal effort required
FIRE!!!!!!!
(http://i846.photobucket.com/albums/ab25/yellowmgzr/Mobile%20Uploads/f5191eef.jpg)
Title: Re: Rear beam Done!!
Post by: Wazzzer on 12 May 2012, 15:43: did you find out how to line the vRS bushes up?
Title: Re: Rear beam Done!!
Post by: AD1.8T on 12 May 2012, 16:10: Yeah mate theres a gap either side of the bush with nipple things line that to the bit lol dunno what to call it heres a picture !
(http://i846.photobucket.com/albums/ab25/yellowmgzr/Mobile%20Uploads/9b054868.jpg)

Look right? ...... Im not taking it off again lol
I was hoping the bushes would sort the obscurity of the beam but it never so il get it lined up at the mot ! Next to do is top mounts front/rear and all the wishbone bits then should feel nice and tight is it worth doing arb and droplinks the arbs were in good condition when i put the r32 one on and the droplinks are at such a crap angle i dont think it will matter
Title: Re: Rear beam Done!!
Post by: Wazzzer on 12 May 2012, 16:14: (http://img.photobucket.com/albums/0803/WesRS/rearbeambush1.jpg)

(http://img.photobucket.com/albums/0803/WesRS/rearbeambush2.jpg)

Looks like you got it bang on mate :afro:
Title: Re: Rear beam Done!!
Post by: AD1.8T on 12 May 2012, 16:18: Yh thats what we went by i presume the bush isnt in back to front then ...... And 2mm or so wont make a difference ?
Title: Re: Rear beam Done!!
Post by: richw911 on 12 May 2012, 20:03: Nice work :cool:
Title: Re: Rear beam Done!!
Post by: AD1.8T on 12 May 2012, 20:17: Cheers mate im gunna do the topmounts my self but leave the balljoints and bushes for a garage to do canny be bothered with them !