GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: MK4_20VT on 06 June 2005, 06:33
-
I'm looking to re-bore my 8v or dump a 16v into my mk2.
1. Is it a pain in the ...... to put a 16v into a early k-jet 8v e.g matching up fuel lines etc
2. Has anyone got a 2.0l 8v here? (cannot get the search engine to work) whats the power, fuel econ like??
3. Can the 8v be bored to 2.0l??
Thanks for looking
Jay
-
1. not sure
2. if they have its probably a mk3, although jimbo might have one in his mk2
3. you can bore them out to 83.5mm i believe and then you have to use a longer throw crank to get the 2ltrs 95.5mm i think. when i bored mine i was advised to go to 1900, 1940 maximum and to not bother with a longer crank, so now its a 1900. still running it in but so far feels great!
-
What power is you 1900 putting out bud?? I prob will go for the rebore to 1900, do you notice the improvement in power alot??
Ps where did you get your front grille from I WANT I WANT, as it's the best I'v seen by far :evil:
-
not sure on power yet but been quoted around the 150 mark which would be nice, i'm going to let it free up a bit then get it rolling road tuned to see what its putting out....
.... as for the grill, i made it. at stonor at the weekend i had soooo many people asking where i got it i'm thinking of making more and selling them on!
-
Around 150 eh, that is v-nice increase from a 112, what cam are you running in it, a 285 road/rally cam??
And about making another grille & selling them, PLEASE DO.. or tell me how you made it :wink: as I have an idea how it's done.
How much did the work cost for the rebore & replacements parts e.g. oil pump
-
yeah i hope its somewhere around that and yeah its a piper 285 cam, i had the head done and the manifolds ported to match a corrado milltek downpipe.
i could make some more, we'll see...... i quite like the fact that no-one else has got one but they are simple enough to make but quite tricky to get looking good.
i was lucky with regards to cost, i knew a guy who bored it for free, but a re-bore should cost about £100 with the vat. the pistons would be about £300, maybe more. have a look at TSR's website as they list a kit which works out about £500+ for the bits to do it. i didn't change my oil pump, not sure if i should've? no-one mentioned it during the whole process but i renewed all the bearings seals etc. didn't seem worth doing half a job.
-
Cool, thanks for all the info joe, whats the full web address for TSR so I can start to price up the rebore?