GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: jockgti on 28 April 2012, 20:46
-
hi,if you swap your normal front bumper for an R32 one do the arch liners still fit ok ? or is something else needed? and also does the cupra splitter bond or is it clipped on somehow? cheers
-
You'll need to extend the arch liner, you can just screw the LCR splitter on the bottom of the bumper
-
extend it how? by adding something to it or ?
-
I seem to remember that the .:R Line bumpers came with an arch extension when bought new from VW. But I mean if you want to extend it you can probably do a DIY job easy enough I'm sure you could get some arch linnets from a scrap yard and knock something up.
-
right ok that's what i was trying to get at,if there was a proper thing to buy or a diy job cheers
-
i made my own arch extensions out of an old black bucket :grin: il take some pics and put them up for you tomorrow jock :wink:
as for the splitter i used a small drill bit pre drilled the holes and used small nuts and bolts to fix it this way if you ever want to remove it you can do it easily :wink:
-
just found a thread on ukmkiv's with part numbers for extensions from vw will phone them monday see how much
-
diy it ...its more fun knowing you built it :grin:
-
is there a big gap to cover or is it quite a small distance?
-
its roughly 25cm long and 4cm wide at the lowest point then tapers up
i think i paid about £6 each for them from the dealer. Then i found a pair of them already in the box along with the replica R32 sideskirts i bought. And after all that i found my arch liners didnt need extending they seemed to line up fine with an oem bumper :huh:
-
cool cheers for info
-
oh well i guess i saved 12 quid :grin:
-
i just bodged mine, save myself some money