GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: dilbert on 28 April 2012, 20:26

Title: seat cupra r 225 bhp 3inch airmass ?
Post by: dilbert on 28 April 2012, 20:26

any help would be great,

i know the vr6'S run a 3inch air mass housing standard, anyone know if the audi tt and cupra r 225 bhp air mass housings are 3inch ?


thanks alot jamie

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: ReDBull on 28 April 2012, 20:33

Yes the BAM, AMK MAF is 80 mm which I belive is 3"

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: dilbert on 29 April 2012, 00:00

thanks alot mate 

 :wink:

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: wretch20vt on 29 April 2012, 12:50

vr6 = 2.75"
seat LCR = 3"

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: dilbert on 29 April 2012, 17:57

Quote from: wretch20vt on 29 April 2012, 12:50

vr6 = 2.75"
seat LCR = 3"

cheers   :wink:

thanks for the replys

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: Wazzzer on 29 April 2012, 18:02

not taking the proverbial but don't just throw it all together and expect it to work, the MAF scale will need adjusting to add more fuel along with the extra air going in

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: dilbert on 30 April 2012, 18:13

Quote from: Wazzzer on 29 April 2012, 18:02

not taking the proverbial but don't just throw it all together and expect it to work, the MAF scale will need adjusting to add more fuel along with the extra air going in

yh its all good mate,

getting the bits together to do ko4 conversion

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: Wazzzer on 30 April 2012, 18:14

sweet  :cool:

Title: Re: seat cupra r 225 bhp 3inch airmass ?
Post by: ReDBull on 30 April 2012, 22:53

Quote from: dilbert on 30 April 2012, 18:13

Quote from: Wazzzer on 29 April 2012, 18:02

not taking the proverbial but don't just throw it all together and expect it to work, the MAF scale will need adjusting to add more fuel along with the extra air going in

yh its all good mate,

getting the bits together to do ko4 conversion

How far are you going with your conversion?