GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: dan2252 on 24 April 2012, 00:20

Title: 330cc injectors? and stronger rods?
Post by: dan2252 on 24 April 2012, 00:20

hello im wanting bigger injectors for my 1.8t as im aiming for 235 240 bhp would be lovely!  its a agu 1999, ive been told by somone i need 330cc injectors but are they from another vehicle or is the a company selling them? and also recently heard 1.8ts are common for bending con rods? do the 225 bhp rods fit and are the stronger then mine? thanks danny

Title: Re: 330cc injectors? and stronger rods?
Post by: barrym381 on 24 April 2012, 00:42

you wont need better rods the 1s in your engine will be fine

Title: Re: 330cc injectors? and stronger rods?
Post by: Toby on 24 April 2012, 07:21

Iv got some 310cc ford reds. Brand new!
Will fit right into your agu

Rods etc you would be wasting your money, unles you plan on going over 300 bhp

Title: Re: 330cc injectors? and stronger rods?
Post by: wretch20vt on 24 April 2012, 07:23

dont you mean 300lbft? its the torque that kills the rods.

Title: Re: 330cc injectors? and stronger rods?
Post by: Toby on 24 April 2012, 07:51

 :grin: yea!

I'm pushing 286 tourke so not far off.  :lipsrsealed:

Title: Re: 330cc injectors? and stronger rods?
Post by: wretch20vt on 24 April 2012, 08:07

Quote from: Toby on 24 April 2012, 07:51

:grin: yea!

I'm pushing 286 tourke so not far off.  :lipsrsealed:

crazy machine, warp speed.   :cool::evil:

Title: Re: 330cc injectors? and stronger rods?
Post by: dan2252 on 24 April 2012, 10:39

thanks for the replys guys! good to know about the rods been ok doubt ill be seeing 300 bhp wanting to get it too 240 and il be very happy :) and about the injectors would 310cc be good for geting me towards 235 240?

Title: Re: 330cc injectors? and stronger rods?
Post by: Toby on 24 April 2012, 11:50

Yeah will certainly help a lot over standard!


Where are you getting it mapped?

Title: Re: 330cc injectors? and stronger rods?
Post by: dan2252 on 24 April 2012, 16:44

ive been looking into rtech? as i can see from your build thread yours was mapped there, seem to be the cheapest and offer best service i emailed rtech but ive heard before hes a busy guy havent heard owt like, gonna be a few months yet im geting it ready at the moement :) new actuator, clutch next so i know once its done it can take the power ! haha

Title: Re: 330cc injectors? and stronger rods?
Post by: Toby on 24 April 2012, 17:14

yeah there very very busy!!

id recomend them hands down!

clutch is a must! aswel as a forge actuator ( as the turbo's are getting old now, so atleast the new actuator will be adjustable)

pm me about the injector's, im sure we can come up with a deal  :wink: