GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: stainesy on 23 April 2012, 21:08
-
ok have spotted a set of wheels i think are lovely but they need adaptors. i have found the adaptors i need on ebay but i can see a centre bore lip bit if you no what i mean like what hubcentric spacers have . are these safe?
http://www.ebay.co.uk/itm/200737443527?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_500wt_1287
-
Seriously dude, please don't buy these they look dodgy as hell, h&r or adaptec will sort you out for not much more, my problem with these is they are trying to do too much with the 3 pcd's and there is no locating ring....
Wheel adapters is not the place to save money, it's not nice when a wheel comes off.....
-
I wouldn't touch them with a barge pole :undecided:
-
Where could I get the same adaptors in that fitment then? And how much for?
-
I wouldn't touch them with a barge pole :undecided:
Agreed they look well dodgey :shocked:
-
Try venom motorsport or h&r direct online, adapters are always about £150 an axle tho
-
they look well dodgey , bet the whells must stick out like a sore thumb... :grin: :smiley:
-
they look awful dude dont do it
-
and i sold my 5x100 to 5x114.3 adapters only a few weeks ago!
super forma (i think) on ebay did mine £200 odd tops.
-
couldnt find them on uk ebay.
found these on us one
http://www.ebay.com/itm/380427004025?item=380427004025&pt=Motors_Car_Truck_Parts_Accessories&cmd=ViewItem&hash=item5893376879&vxp=mtr
also try german ebay! bought a set of 4x100 to 5x120 recently on there
-
You could probably make a sleeve to centre them, but for that cost you might as well get the proper article.
-
and i sold my 5x100 to 5x114.3 adapters only a few weeks ago!
super forma (i think) on ebay did mine £200 odd tops.
the wheels im looking at buying are actuly identical to your old ones. 3 spoke polished ones :grin:
-
couldnt find them on uk ebay.
found these on us one
http://www.ebay.com/itm/380427004025?item=380427004025&pt=Motors_Car_Truck_Parts_Accessories&cmd=ViewItem&hash=item5893376879&vxp=mtr
also try german ebay! bought a set of 4x100 to 5x120 recently on there
these ones dont have the middle ring ither
-
No, they don't but they do have a lot more meat around the studs, non hubcentric is not a problem but it does put more stress on the wheel studs thus making the need for more surface area to spread the point loadings all the more important...
-
It costs the same to weld up the bolt holes and redrill to 5x100.
Search for someone to do that!
-
There's no way i'd use those adapters, they look feeble as fvck.