GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: gm8 on 23 April 2012, 16:38

Title: door lock module help SORTED :)
Post by: gm8 on 23 April 2012, 16:38

right , done both sides today , and all electrices now working , kerb lights etc. However I must have f%$d up the mechanical bits somehow and need some help.

passenger side : lock pin moves up and down when locking/unlocking however door can be opened in lock position ????

Drivers side : lock pin moves down only , wont pop up when unlocking door cannot be opened from outside ???????

Title: Re: door lock module help
Post by: gm8 on 23 April 2012, 21:18

surely someone has DIY'd this lol

anyway , im done for now. Passenger side 100% sorted thankfully.

drivers door wont unlock with for , but will with key ? ? ? ?

Title: Re: door lock module help SORTED :)
Post by: gm8 on 25 April 2012, 18:43

sorted now ! and saved a fair wad too.

good to have working locks,alarm,kerb lights etc again :)

feel free to pm me if you need any help as i think i know these things inside out now.

Title: Re: door lock module help SORTED :)
Post by: daz veedub on 25 April 2012, 18:47

cool man  :smiley:

Title: Re: door lock module help SORTED :)
Post by: richw911 on 25 April 2012, 19:02

What was wrong?

Title: Re: door lock module help SORTED :)
Post by: gm8 on 25 April 2012, 19:03

no kerb lights , no warnning buzzer when lights on / door open etc. The soldered connections in the door module had failed.

Title: Re: door lock module help SORTED :)
Post by: richw911 on 25 April 2012, 19:11

Quote from: gm8 on 25 April 2012, 19:03

no kerb lights , no warnning buzzer when lights on / door open etc. The soldered connections in the door module had failed.

No was meaning the lock issues after soldering  :smiley:

Title: Re: door lock module help SORTED :)
Post by: gm8 on 25 April 2012, 19:15

i had moved the cog gear ever so slightly when i took it apart so it was not in the right position thus not moving the lock mech properly.

Title: Re: door lock module help SORTED :)
Post by: richw911 on 25 April 2012, 19:16

Quote from: gm8 on 25 April 2012, 19:15

i had moved the cog gear ever so slightly when i took it apart so it was not in the right position thus not moving the lock mech properly.

Ah  :smiley: Great work :afro: