GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: kahunajb on 21 April 2012, 21:13
-
I don't usually venture over here onto dry land as I spend most of my time in the mk3 section but I am after some advise please as I don't know much about Mk2 suspension.
I bought some mk2 Koni shocks off another forum member to fit to my mk3 and have a few bits left over which I think might be worth a bit of beer money. Just after confirmation they are what I think they are before I put them in the Classified section and I make a tit of myself advertising them as something they are not.
Firstly we have these which are stamped JOM which I am assuming are JOM lowering caps. Was thinking £12 posted.
(http://i1191.photobucket.com/albums/z473/kahunajb/IMAG0038.jpg)
(http://i1191.photobucket.com/albums/z473/kahunajb/IMAG0040.jpg)
Then we have these which are marked by Bonrath DS-2-FS which I am assuming are some kind of polyurethane top mount. The bearings are stamped DS/FS by Bonrath and have surface corrosion but spin freely. Not really sure what these are worth £10-£12 posted or maybe scrap not sure.
(http://i1191.photobucket.com/albums/z473/kahunajb/IMAG0042.jpg)
(http://i1191.photobucket.com/albums/z473/kahunajb/IMAG0041.jpg)
Finally we have these which I am assuming are some kind of polyurethane bump stop but not 100% as traditional bump stops were also fitted to the rear. Not sure if they are worth anything?
The red ones are marked 60064 and the yellow ones KON BSO1.
(http://i1191.photobucket.com/albums/z473/kahunajb/IMAG0044.jpg)
(http://i1191.photobucket.com/albums/z473/kahunajb/IMAG0043.jpg)
Thanks in advance.
-
Spring caps, top mounts and bumpstops by the look of it.
Best place for 'em is in the bin.