GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: golfyste on 06 April 2012, 22:38
-
Ok so now the car is finally sorted I'm ringin r tech tommorow to book the map! :cool:
Mods include:
Backdraft Borg Warner k04-001
G60 fly/vr6 clutch
Forge 007p
Walbro 255 fuel pump
The front mounted intercooler
Silicone creation Motorsport tip
Silicone pipes throughout
Saikou Michi catch can set up
Bam injectors
K&N typhoon induction kit
Full turbo back custom exhaust
Forge Actuator
This engine mounts
Power flew dogbone
And then many other pieces not as much to do with performance
Did all the work myself apart from the exhaust and induction kit so lookin forward to the results of the map :grin:
-
:cool:
-
:cool: :cool:
-
Excellent stuff mate, should see some good results :afro:
-
Hopin so :grin:
-
should be ok mate get results up asap :cool:
-
should be ok mate get results up asap :cool:
Yeah will do but gotta book it in think it will be first weeks of may as they are really busy but will keep updating :cool:
-
good stuff they are always busy mate but should be a good result with k04 think its gonna be my next route just wish i didnt get rid of my fmic now :cry: :grin:
-
good stuff they are always busy mate but should be a good result with k04 think its gonna be my next route just wish i didnt get rid of my fmic now :cry: :grin:
Yeah they said start of may when I range last week but may be a bit later now.
Yeah can't wait! :grin:
Not 100% sure but guess bout 260bhp?? Not settin my mind on it really cus if I say somethin and its less it won't be as exciting :laugh:
-
Booked for the first of may :grin:
-
Goin in tommorrow :grin:
-
Good luck mate should see some big figures hopefully ! :wink:
-
Well dOnt wanna get overly excited incase they turn round and saythey can't do it do some reason :undecided:
But hope fully all will be well :evil:
-
Good Luck fella. Should make for an interesting drive home after the remap. :smiley:
-
Cheers mate
Yeah should be :evil:
Will keep you all updated :grin:
-
bet you cant wait now :grin: the clock is ticking :laugh:
-
bet you cant wait now :grin: the clock is ticking :laugh:
:evil:
-
be interesting to see how much of a benefit the forge actuator is on a k04-001.
are you sticking with standard rods?
will have an almost identical engine spec soon just need to source fuel pump and 380cc injectors.
looking forwards to the results hope all goes well :)
-
Just dropped her off at r tech! :evil:
-
:evil: how long is it there for? A week?
-
:cool: i bet your like a big kid now and you will probably get home much quicker than you usually would :laugh:
-
Yeah around abouts not a set pick up date gotta see how it goes :cool:
-
Had an afternoon to work on the car and getting it to play ball my way... mainly just setting up the boost to run fully open loop under full load to get the best and most linear boost profile. With 21psi peak I am seeing 288lbft :wink: not worked on the peak power yet just midrange on stock injectors and still seeing 244bhp. So far looking good.
Tomorrow Jim is going to get the BAM injectors fitted and rip the engine apart to try to find fault..lol then we can move on to thr bulk of the tuning and logging and make power :grin:
Are you running yellow spring in forge actuator? it feels and acts like one
Nick
-
That sounds awesome mate ! :smiley: can't believe you have got that in one afternoon :laugh:, did try ringin you but think you had already closed up?
Ok nick that sounds great have you put in the new plugs yet?
And yeah it's a yellow spring about 2 months old :smiley:
Will give you guys a ring tommorrow afternoon, when do you close up?
Cheers pal :smiley:
-
Another question nick, did you you do any dyno runs to start with? Didn't know if you would with the different turbo but was wondering what sort of figures it was puttin out :smiley:
Cheers mate :smiley:
-
Another question nick, did you you do any dyno runs to start with? Didn't know if you would with the different turbo but was wondering what sort of figures it was puttin out :smiley:
Cheers mate :smiley:
stock 165bhp 180lbft with ecu cutting n75 to 0% and cutting throttle plate angle.
Today was only to get control of the boost via writing a base line open loop n75 map, so basically making the ecu work like an electronic boost controller, so 70% n75 dc is my upper limit to produce 21psi peak 288lbft and taper to around 12psi at the top end still with 70% dc to make 244bhp. Tomorrow its Jims turn to work on the car to make sure and get the car mechanically sound, injectors, plugs, smoke test, pressure test, cam/crank timing test.
then wind the car up for power, the only flow limit I can see is the exhaust system.
-
Ok mate, they are the sort of figures I were expecting, has it been mapped before do you know?
That's sounds sweet mate will give you a bell tommorow see how your gettin on or just write a little on here.
Which part of te exhaust do you think as I did my best at porting the manifold.
Cheers mate :smiley:
-
how long do you have the car for nick???
-
how long do you have the car for nick???
About a week for me as its a k04-001 :smiley:
-
mine would be the same then as i have a ko4-22 to go on mine :rolleyes:
-
im jealous again.. :cry: good work mate.. :smiley:
i seriously need to raise some cash... :embarassed:
-
im jealous again.. :cry: good work mate.. :smiley:
i seriously need to raise some cash... :embarassed:
:smiley: can't have it all at once that's why its called a project :grin:
Also just ordered some weitec gt coilovers to fit after tr map :cool:
-
need mine mapping,, got loads of stuff that needs putting on mine be for map though
-
Will be interesting to see the results :cool:
-
It's in good hands :cool:
-
Hi,
Just read your build thread and see you mentioned BAM injectors? I am just fitting the injectors now and they are Saab Bronw 023 350cc injectors? Not a problem of issues they will work just as well, just need a little fettel to get fuel trims correct.
http://www.witchhunter.com/flowdatapix/b0280156023.jpg
Nick
-
plus got old coil packs :sad: lol
Do you mind of I book it in at the dealers to get the coil packs replaced £FOC?
Nick
-
Hi,
Just read your build thread and see you mentioned BAM injectors? I am just fitting the injectors now and they are Saab Bronw 023 350cc injectors? Not a problem of issues they will work just as well, just need a little fettel to get fuel trims correct.
http://www.witchhunter.com/flowdatapix/b0280156023.jpg
Nick
Ok mate I bought them thinkin they were bam sorry bout that but if they are pretty much the same its all good :smiley:
plus got old coil packs :sad: lol
Do you mind of I book it in at the dealers to get the coil packs replaced £FOC?
Nick
Ok mate, will have to be haha, how long extra will you need it?
Cheers :smiley:
-
Tick.....tock.....tick....tock...... Not Long now :grin:
Can't wait lookin forward to the result :cool:
-
What we talking then mate? Picking her up today?
-
Yeah mate already on my way! :grin:
At Leicester now ha :cool:
-
So.... What was the results!?!?!?!?!?
-
:laugh: I dunno yet
They say it will be done at 4 so will be having the final runs later and will update :cool:
-
Bet uv got a semi already :grin:
-
Woke up at half 6 and wanted to sleep longer so time would pass but every time I closed my eyes time seemed to go on for ever :laugh:
-
Looking froward to hearing your feed back as I was going to ring r-Tec today to book my car in. But was to busy at lunch time.
I read on page one that you have a creation Motorsport tip. Have you thought about a Badger5 80mm TIP or SFS 80 mm TIP.
Here is a link to the B5.
http://www.seatcupra.net/forums/showthread.php?t=328699
-
Ok all sorted! :cool:
Running 250bhp and 311ftlb of torque!
Pulls like hell :laugh:
-
:cool:
-
Looking froward to hearing your feed back as I was going to ring r-Tec today to book my car in. But was to busy at lunch time.
I read on page one that you have a creation Motorsport tip. Have you thought about a Badger5 80mm TIP or SFS 80 mm TIP.
Here is a link to the B5.
http://www.seatcupra.net/forums/showthread.php?t=328699
Wont fit his ko4 turbo
Nick
-
Ok all sorted! :cool:
Running 250bhp and 311ftlb of torque!
Pulls like hell :laugh:
bet ur a happy man!!
Very nice results! nice torque! :cool:
-
Ok all sorted! :cool:
Running 250bhp and 311ftlb of torque!
Pulls like hell :laugh:
bet ur a happy man!!
Very nice results! nice torque! :cool:
The 001 is an extreamly very fast spooling turbo and can make awesome torque numbers low down,
-
:rolleyes: :lipsrsealed: oh niki.... lol! LSD , WMI ARB's then rebuild engine, then Hybrid or gt28... :lipsrsealed:
-
Ok all sorted! :cool:
Running 250bhp and 311ftlb of torque!
Pulls like hell :laugh:
Sweeet :laugh: bet its awesome :afro:
-
great result that and good torque figures as said :cool:
-
Looking froward to hearing your feed back as I was going to ring r-Tec today to book my car in. But was to busy at lunch time.
I read on page one that you have a creation Motorsport tip. Have you thought about a Badger5 80mm TIP or SFS 80 mm TIP.
Here is a link to the B5.
http://www.seatcupra.net/forums/showthread.php?t=328699
Wont fit his ko4 turbo
Nick
Didn't realise there was a differance in K04s. Yous lives and learn.
-
Poor rods :grin:
Nice figures mate!
-
Cheers guys and a massive thanks to the guys at r tech! Very very happy :grin:
The power doesn't seem high but may just have to get a milltek to sort that :cool:
But the pull is crazy!! :laugh:
Think water /meth may also be next :grin:
-
:cool:
Got a graph? We love graphs here :nerd: :smiley:
-
Cheers guys and a massive thanks to the guys at r tech! Very very happy :grin:
The power doesn't seem high but may just have to get a milltek to sort that :cool:
But the pull is crazy!! :laugh:
Think water /meth may also be next :grin:
Power comes from air flow and with that Vortex twister back box on a 2.1/4 pipe is not flowing at the top end like my Ko4-001 and the ones I have done with the Milltek nos red TBE systems.
The midrange grunt is awesome...
-
Cheers guys and a massive thanks to the guys at r tech! Very very happy :grin:
The power doesn't seem high but may just have to get a milltek to sort that :cool:
But the pull is crazy!! :laugh:
Think water /meth may also be next :grin:
Power comes from air flow and with that Vortex twister back box on a 2.1/4 pipe is not flowing at the top end like my Ko4-001 and the ones I have done with the Milltek nos red TBE systems.
The midrange grunt is awesome...
I noticed :grin:
:cool:
Got a graph? We love graphs here :nerd: :smiley:
I will get it up when I get home ....just put with the missus shoppin....apparently because it's nowapped and I'm happy it means I have to take her shoppin :evil:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Fcuk that; I wouldn't have told her owt :laugh: :laugh: :laugh:
-
haha priceless
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
nick the mrs as just seen that what the heck are you saying :grin: :grin:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Window shopping only I'm afraid......I've got an exhaust to buy :laugh:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Window shopping only I'm afraid......I've got an exhaust to buy :laugh:
:grin: sounds even better
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Window shopping only I'm afraid......I've got an exhaust to buy :laugh:
:grin: sounds even better
:laugh: :wink:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Fcuk that; I wouldn't have told her owt :laugh: :laugh: :laugh:
Did u buy your missus a new car over the weekend?? lol
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Window shopping only I'm afraid......I've got an exhaust to buy :laugh:
lol.... took her to miltek show room hehe
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Fcuk that; I wouldn't have told her owt :laugh: :laugh: :laugh:
Did u buy your missus a new car over the weekend?? lol
Nope - stupid garage said a) they were open and b) they had the car we wanted to look at. Got there and they were fooking closed :angry: And had sold the car............. :angry: :angry:
-
very nice figures 311ft-lb is a huge amount
graph ;)
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Fcuk that; I wouldn't have told her owt :laugh: :laugh: :laugh:
Did u buy your missus a new car over the weekend?? lol
Nope - stupid garage said a) they were open and b) they had the car we wanted to look at. Got there and they were fooking closed :angry: And had sold the car............. :angry: :angry:
no doubt you'll find the exact same car for sale somewhere else for a grand less... deja vu!
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Fcuk that; I wouldn't have told her owt :laugh: :laugh: :laugh:
Did u buy your missus a new car over the weekend?? lol
Nope - stupid garage said a) they were open and b) they had the car we wanted to look at. Got there and they were fooking closed :angry: And had sold the car............. :angry: :angry:
no doubt you'll find the exact same car for sale somewhere else for a grand less... deja vu!
Ha i wish!! Only way that will happen is if Linzi buys privately but she has her Trading Standards head on and wants to buy from a garage.....
-
thats not such a bad thing, that way she can moan at the garage when it goes wrong.. buy privately and she'll be moaning at you :grin:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Fcuk that; I wouldn't have told her owt :laugh: :laugh: :laugh:
Did u buy your missus a new car over the weekend?? lol
Nope - stupid garage said a) they were open and b) they had the car we wanted to look at. Got there and they were fooking closed :angry: And had sold the car............. :angry: :angry:
no doubt you'll find the exact same car for sale somewhere else for a grand less... deja vu!
Ha i wish!! Only way that will happen is if Linzi buys privately but she has her Trading Standards head on and wants to buy from a garage.....
Shame as there are bargains out there look at the Ibiza i got 32k one owner for £2200 as said at least with a garage Linzi can sort them out if anything goes wrong :laugh:
-
sooo what's quicker? ;)
311ft lbs of torque with 250hp
or 304 hp with 286ft lbs of torque
;)
-
sooo what's quicker? ;)
311ft lbs of torque with 250hp
or 304 hp with 286ft lbs of torque
;)
:laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:
-
lol what the f**k are those smilies
-
(http://i1197.photobucket.com/albums/aa433/golfyste/dyno.jpg)
:cool:
As nick said before my s**ty exhaust slows the gas flow considerably at high rpm so he went for a high peak of torque low down and in the mid range :cool:
-
LOL The car has had TLC and ££££, now the missus turn... :smug:
Window shopping only I'm afraid......I've got an exhaust to buy :laugh:
lol.... took her to miltek show room hehe
:grin:
-
sooo what's quicker? ;)
311ft lbs of torque with 250hp
or 304 hp with 286ft lbs of torque
;)
(http://www.replify.com/wp-content/uploads/2011/03/fight1.jpg)
-
sooo what's quicker? ;)
311ft lbs of torque with 250hp
or 304 hp with 286ft lbs of torque
;)
(http://www.replify.com/wp-content/uploads/2011/03/fight1.jpg)
:laugh:
-
bet its a complete diffrent car from before isnt it? :) haha when you say crapy exhuast what type of exhuast is it? what makes it crap?
-
bet its a complete diffrent car from before isnt it? :) haha when you say crapy exhuast what type of exhuast is it? what makes it crap?
Yeah a massive difference haha
Like havin a totally different car :grin:
It's a custom "vortex" style exhaust which nick explained to me earlier basically has a silence with steel inside that curves around to spin the gasses (in guessin for sound) which in turn slow the gasses down and cause a restriction
So gonna get a milltek I think :cool:
-
ah right i see mate :) just ive got a powerflow turbo back 2.5 and it looks ok just woundering if it would hurt the bhp fiqure, i cant wait to get mine remapped proper. like youve done, like your car though mate looks real good have to keep and eye out for you not too far away from me :)
-
Ah ok mate, I'm guessin as long as you have a decent downpipe and decent boxes shOuldnt be to bad
Cheers mate, started a build thread but gotta knuckle down and get it all written to catch up to presents day :grin:
Yeah I'm sure I will be cruising around :cool:
-
Ah ok mate, I'm guessin as long as you have a decent downpipe and decent boxes shOuldnt be to bad
Cheers mate, started a build thread but gotta knuckle down and get it all written to catch up to presents day :grin:
Yeah I'm sure I will be cruising around :cool:
doesnt look too bad to be honest like theres only a back box no centre boxers or owt like that :) and will take you a while to get all that wrote up mate! looked at it already what youve got so far it looks good pal!
-
Well done mate that is a massive torque figure !
-
Ah ok mate, I'm guessin as long as you have a decent downpipe and decent boxes shOuldnt be to bad
Cheers mate, started a build thread but gotta knuckle down and get it all written to catch up to presents day :grin:
Yeah I'm sure I will be cruising around :cool:
doesnt look too bad to be honest like theres only a back box no centre boxers or owt like that :) and will take you a while to get all that wrote up mate! looked at it already what youve got so far it looks good pal!
Cheers mate :cool:
Well done mate that is a massive torque figure !
Yeah I'm very impressed would defiantly recommend r-tech and will be keeping my Eye out seeing them on the tv :wink:
-
get the 3" turbo back job from the USA mate :wink:
It wasn't loud enough for me :cry:
??
-
get the 3" turbo back job from the USA mate :wink:
It wasn't loud enough for me :cry:
They don't sell them anymore :sad:
Anyone selling one or know where I can get one of them?
-
get the 3" turbo back job from the USA mate :wink:
It wasn't loud enough for me :cry:
They don't sell them anymore :sad:
Anyone selling one or know where I can get one of them?
Didn't know they ever did
-
Who/what are they?
-
thy got the down pipe but the full system aint on there any more it was £199 for the full system
http://www.ebay.co.uk/itm/VW-Golf-GTi-Beetle-A3-TT-TURBO-DE-CAT-Decat-Downpipe-/380437113908?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5893d1ac34
-
i think this is similar to the ones and seems pretty good for the money
http://www.ebay.co.uk/itm/1999-2004-VW-GOLF-JETTA-GTI-MK4-STAINLESS-STEEL-TURBO-BACK-EXHAUST-CATBACK-/370607365207?pt=Motors_Car_Truck_Parts_Accessories&hash=item5649eb9c57
-
I remember they were all the rave in December and I didt have the money for one now I have saved up they gone but this is a good find! I will try this if I don't get a reply from the people who sell the old one
-
Think I might just save and buy a genuine milltek :cool:
-
I messages the original 3 inch chrome people and asked if they have any to sell and they said they have some but are missing parts to them but should be back on sale in 2-3 weeks :smiley:
-
Cool - hope so, seem a nice bit of kit and a large saving on Milltek brand.
-
Is it the XS Relrntless DP your talking about? Also check out the manifold.
http://www.secretseatsociety.co.uk/forums/viewforum.php?f=41&sid=4c0cf0535ba382ab259d2f599fac644f