GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Pearce69 on 25 March 2012, 19:43

Title: Welding sunroof up?
Post by: Pearce69 on 25 March 2012, 19:43

Hey all

Bin having problems with my sun roof leaking. Cleared the drain holes took the sun roof out and found a bit had rusted through on the back of it. Replaced that bit for a 2nd hand one and replaced the seal. Can't get it to go back proper think the deal is too thick. Manged to close it but it pinched the seal and it doesn't sit flush with my roof. Was thinking if it still leaks could I get it welded? If so do you think it would cost a lot?

Arron

Title: Re: Welding sunroof up?
Post by: Wayne on 25 March 2012, 20:42

Welding a roof is not easy, doubt it will be cheap tbh.

Title: Re: Welding sunroof up?
Post by: Steve_B on 25 March 2012, 20:53

Have you tried adjusting the height of the sunroof?

Title: Re: Welding sunroof up?
Post by: Pearce69 on 25 March 2012, 21:56

How do I do that? It kind of sits higher one side and sinks the other.

Title: Re: Welding sunroof up?
Post by: Jay on 25 March 2012, 21:57

Were they not different between early and late models? Could be you've got the incorrect sunroof if so?

Title: Re: Welding sunroof up?
Post by: Steve_B on 25 March 2012, 23:30

There's a how to on removing sunroof in the maintenence section, covers it in there

Title: Re: Welding sunroof up?
Post by: Michael on 26 March 2012, 20:22

Quote from: Pearce69 on 25 March 2012, 21:56

How do I do that? It kind of sits higher one side and sinks the other.

 :grin:Mine does this too! Would love to sort it!