GolfGTIforum.co.uk
General => The garage => Topic started by: MaXXeH on 21 March 2012, 18:03
-
Well a big thanks to the guys in r-tech and ting tong next door :grin:
I finally get to collect my car tomorrow! After all the problems we had due to an electrical fault! The fault codes sent us totally the wrong way! (Thanks VW!) n sent us totally crazy at times lol but got there in the end!
It shows the dedication they have to get the job done and they will help anyone getting there problems solved! (Even herpes. No job to small n all that :lipsrsealed:)
Would recommend these dirty slags to anyone :D
i will say more after i collect the car tomorrow.. wohoooo
Golf mk5- K04 + wmi
(http://www.myjunk.eclipse.co.uk/newcar/build/RR1.jpg)
(http://www.myjunk.eclipse.co.uk/newcar/build/RR2.jpg)
Fantastic work... taa mate.
-
How much HP/torque, what car is that couldn't make it out!
Glad its all sorted mate, just in time for some nice spring weather :wink:
-
339bhp 325lb/ft at the wheels, 396bhp 354lb/ft at the flywheel :shocked::afro:
-
339bhp 325lb/ft at the wheels, 396bhp 354lb/ft at the flywheel :shocked::afro:
What the f**k, what car is it?! :shocked:
-
Nice one mate!! Time to get cracking on the next project :evil:
-
339bhp 325lb/ft at the wheels, 396bhp 354lb/ft at the flywheel :shocked::afro:
What the f**k, what car is it?! :shocked:
golf mk5 gti :cool:
-
Nice one mate!! Time to get cracking on the next project :evil:
yea :D looking at a v6 at the weekend
-
Nice one mate!! Time to get cracking on the next project :evil:
yea :D looking at a v6 at the weekend
to fit a 1.8t by any chance :wink:
-
339bhp 325lb/ft at the wheels, 396bhp 354lb/ft at the flywheel :shocked::afro:
What the f**k, what car is it?! :shocked:
golf mk5 gti :cool:
You fin serious? Surely that has to be a first? That is excessive! Are they 150standard? :shocked:
-
339bhp 325lb/ft at the wheels, 396bhp 354lb/ft at the flywheel :shocked::afro:
What the f**k, what car is it?! :shocked:
golf mk5 gti :cool:
You fin serious? Surely that has to be a first? That is excessive! Are they 150standard? :shocked:
thats a mk4 your thinkin of thats 150 standard
-
mk5s are 200 standard so doubled it lol.
-
Nice one mate!! Time to get cracking on the next project :evil:
yea :D looking at a v6 at the weekend
to fit a 1.8t by any chance :wink:
:wink: have the T3 turbo / rods on order. :rolleyes:
-
Nice one mate!! Time to get cracking on the next project :evil:
yea :D looking at a v6 at the weekend
to fit a 1.8t by any chance :wink:
:wink: have the T3 turbo / rods on order. :rolleyes:
im stuck between fittin a bam into a 4 mo or just going the same route as toby in a 4mo :undecided:
-
get an AGU(really cheap!), AUM ecu, AUM TB, VVT unit :wink:
-
get an AGU(really cheap!), AUM ecu, AUM TB, VVT unit :wink:
was tryin to use the bits from a smashed s3 i have an my pals got a 4mo in his yard just lying there but im sure he has an old s-reg turbo golf aswell :smiley:
-
well if you can get one cheap happy days. make sure it is a bam for them few extra ponies
i am trying to find a real cheap 4m! keep looking at copart.
-
well if you can get one cheap happy days. make sure it is a bam for them few extra ponies
i am trying to find a real cheap 4m! keep looking at copart.
yeah its a white 4mo aswell was painted candy white last year then the head went an he hasnt bothered an ive had a smashed s3 for ages now even bought the missus an s3 as i knew i had spare bits should anythin go wrong but seeing tobys car makes me want a toy again :wink:
-
well if you can get one cheap happy days. make sure it is a bam for them few extra ponies
i am trying to find a real cheap 4m! keep looking at copart.
Or an AMK :smiley: They both map up the same.
-
Do you have a build thread, I'd love to see you got it to nearly 400?! :sick:
-
James FORCED me to tune it for more power today.... :grin: still didnt crack 400bhp but gained 11bhp 22lbft more in the midrange by clipping the 1.5bar map sensor... :lipsrsealed:
The car is t F-ing BEAST!!!
You all need to go Margate and get a test drive.. :grin:
-
dam!! so close to 400! :grin:hopefulyl he will be bringing this to pick up the new engine, and ill get a chance to go out init! :laugh:
-
dam!! so close to 400! :grin:hopefulyl he will be bringing this to pick up the new engine, and ill get a chance to go out init! :laugh:
We even pulled the air filter off to see it it would find 4bhp... but ran a 395bhp...lol
-
its all about poop airfilters! :grin: shame! :(
-
Well i had a fun day yesterday! ( Still love that big turbo mk4 :smug:)
We reinstalled the rs4 valve back into the car and it felt like it had lost some power so we put it on the RR, it made around 370bhp 330lb-ft so a few bhp had gone.
Nick played with the map and increased the rail pressure and n75 load. The car had changed its tune on the RR :evil:
This was the final out come
One epic drive!!
(http://www.myjunk.eclipse.co.uk/newcar/build/RR3.jpg)
I would just like to add, nick was not happy with this as he was a little worried about the rods. I told him to leave it and i will take responsibility if It goes bang (Just means bigger things for me lol)
Big thanks to nick and gang for an EPIC car!!! Would recommend these gay boys to anyone :lipsrsealed:
-
Puff!!
-
what u pufffffing about lol.
-
what u pufffffing about lol.
take it your happy with the car then :smiley:
-
think the puff is what will happen to the engine. It will go puff.
You guys need to calm down with these k04 agu's, 4mo with agu and k04 setups you keep talking about. Im getting restless in saving for my new motor and really want a r32 but you guys keep getting me thinking of a 1.8t big turbo conversion. :cry:
-
(http://www.myjunk.eclipse.co.uk/newcar/build/RR3.jpg)
now THAT looks like fun!
-
Fook me :shocked:
Full specs on the engine?
-
golf gti mk5, BWA with K04
HPFP
RS4 Valve
Evom intake
BSH intake pipe
S3 injecters
Neuspeed Hiflow IC pipe
THS IC
Full milltek system
WMI
The clutch went bang, waiting for new parts lol.
-
(http://www.myjunk.eclipse.co.uk/newcar/build/RR3.jpg)
now THAT looks like fun!
You will have to pop over next time ist down for a pilot drive.... its utter madness the dwarf shat a brick.. :grin:
Nick
-
think the puff is what will happen to the engine. It will go puff.
You guys need to calm down with these k04 agu's, 4mo with agu and k04 setups you keep talking about. Im getting restless in saving for my new motor and really want a r32 but you guys keep getting me thinking of a 1.8t big turbo conversion. :cry:
Sell me your AGU head, that'll put a stop to your modding :laugh:
You will have to pop over next time ist down for a pilot drive.... its utter madness the dwarf shat a brick.. :grin:
Nick
LOL :laugh: :grin:
-
think the puff is what will happen to the engine. It will go puff.
You guys need to calm down with these k04 agu's, 4mo with agu and k04 setups you keep talking about. Im getting restless in saving for my new motor and really want a r32 but you guys keep getting me thinking of a 1.8t big turbo conversion. :cry:
Sell me your AGU head, that'll put a stop to your modding :laugh:
Erm would do mate but its fitted to my old motor that Toby now owns :laugh:
-
golf gti mk5, BWA with K04
HPFP
RS4 Valve
Evom intake
BSH intake pipe
S3 injecters
Neuspeed Hiflow IC pipe
THS IC
Full milltek system
WMI
The clutch went bang, waiting for new parts lol.
I wasnt far out with the PUFF then, instead of engine it was the gearbox side of things. :grin:
-
Right, that does it, I'm going to R Tech with mine to sort out the results of somebody else's comedy map.
-
Right, that does it, I'm going to R Tech with mine to sort out the results of somebody else's comedy map.
:grin: What car and what spec?