GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Chris#101 on 16 March 2012, 19:27
-
Right ive got a few tricks up my sleeve :smug: but im needing help :smiley:
*Im after a set of 380cc injectors... are there any vag cars that run these standard that would fit the golf 1.8t fuel rail etc!?!?
*Water meth injection, Who sells the cheapest kit these days!? OR has anyone got a list of things needed to D.I.Y the job?
*Are there any high flow/large port exhaust manifolds out there for the golf 1.8t!?
thanks in advance
-
been looking for a k03s type manifold myself.. cant seem to find one.. :drool:
-
http://www.tsr-performance.com/webshop/parts-by-category/exhaust-manifolds/tubular-turbo-exhaust-manifolds/k04-high-flow-tubular-manifold-tsrk04mani-suitable-for-all-1-8t-k04-turbo-cars-such-as-audi-tt-and-leon-cupra-r/
not cheap tho, and not worth it for a k03-4 as the gains just arent there, but im assuming if your after injectors that size and a meth setup then your not fitting an oe turbo?
-
That is one nice looking manifold but Wayyy out of my budget :shocked:
Im looking into buying a K03s hybrid, k04-001 turbine with K03s compressor :drool:
But Ive been advised il need all mentioned just struggling to find anything :sad:
-
the manifold above is for k04-023 turbos not k03..
-
doesnt matter either way as I certainly wont be buying it :grin:
Found a possibility..
http://www.fr-rtuning-shop.co.uk/index.php?_a=product&product_id=1844
Anyknow know much about them?
thanks :smiley:
-
Can't get THS one anymore range them dont do it.
http://www.ebay.com/itm/Turbo-Manifold-VW-Transverse-High-Flow-JETTA-GTI-GOLF-TT-AUDI-WOLFSBURG-/120872154143?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AGolf&vxp=mtr&hash=item1c248ab41f
http://www.ebay.com/itm/audi-tt-1-8t-fwd-transverse-high-flow-turbo-manifold-/130650865046?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AGolf&vxp=mtr&hash=item1e6b65fd96
-
meth inj awesome i run devils own kit brilliant, been put of buy cast manifold as hear they crack looking out for tubular one but no luck for ko3s. All seem to be for k04's, i got some saab yellows 3" housing all ready to be fitted. Need power run see what its running at 1st.
-
cheers for the link bud :wink: now for the questions :shocked: :grin:
Did you have the meth kit from new?
Where did you get it from
Was it hard to fit?
Is one of these it?
http://www.alcohol-injection.com/en/169-golf-jetta-passat-18t
Do you know what Flow rate the Saab yellow injectors are?
cheers dude :smiley:
-
iv got some ford red tops - cant remmeber the cc but there good for a ko3s set up.
-
think there around 330-360cc injectors toby.
-
ill find out tomorow when i get them back :grin:
-
was thinking of popping down again but got some stuff to do up here. Enjoy the drive home and dont blow her up.
-
shame! :cry:
yeah ill try not to :grin:!
got a very good day out next saterday! REVO day! :shocked: :rolleyes:
-
ill find out tomorow when i get them back :grin:
IF you could bud that would be fab.... Or even better ask Nick if they be useable in Chris Elvin's Auq 180 set up, as Il be ringing them tomorrow
-
wil do buddy!
-
Yellows 350ish if i remember rightly, got some genesis ones my nephew sent me from states but there 680cc so wont be using them.
-
i need some 440's :grin:
-
cheers for the link bud :wink: now for the questions :shocked: :grin:
Did you have the meth kit from new?
Where did you get it from
Was it hard to fit?
Is one of these it?
http://www.alcohol-injection.com/en/169-golf-jetta-passat-18t
Do you know what Flow rate the Saab yellow injectors are?
cheers dude :smiley:
Got mine from new and piece of cake to fit, just run water feed through chassis leg from back to front, pump in wheel well rest where you want. Fitted boost gauge to know what psi pumps starts to run.
-
cheers for the link bud :wink: now for the questions :shocked: :grin:
Did you have the meth kit from new?
Where did you get it from
Was it hard to fit?
Is one of these it?
http://www.alcohol-injection.com/en/169-golf-jetta-passat-18t
Do you know what Flow rate the Saab yellow injectors are?
cheers dude :smiley:
Got mine from new and piece of cake to fit, just run water feed through chassis leg from back to front, pump in wheel well rest where you want. Fitted boost gauge to know what psi pumps starts to run.
Orite nice :smiley: is the electrical side of things easy to do? can you adjust when it needs to be spraying?
Where did you get yours from ?
-
kit i use is this one, can adj spray time mine runs at 12psi.
http://www.methanol-injection.co.uk/product_info.php?cPath=21&products_id=28
-
Right ive got a few tricks up my sleeve :smug: but im needing help :smiley:
*Im after a set of 380cc injectors... are there any vag cars that run these standard that would fit the golf 1.8t fuel rail etc!?!?
*Water meth injection, Who sells the cheapest kit these days!? OR has anyone got a list of things needed to D.I.Y the job?
*Are there any high flow/large port exhaust manifolds out there for the golf 1.8t!?
thanks in advance
Saab red tops with a 4 Bar FPR should cover it. I'm sure theres a set on CGTI for sale £40
-
Right ive got a few tricks up my sleeve :smug: but im needing help :smiley:
*Im after a set of 380cc injectors... are there any vag cars that run these standard that would fit the golf 1.8t fuel rail etc!?!?
*Water meth injection, Who sells the cheapest kit these days!? OR has anyone got a list of things needed to D.I.Y the job?
*Are there any high flow/large port exhaust manifolds out there for the golf 1.8t!?
thanks in advance
Saab red tops with a 4 Bar FPR should cover it. I'm sure theres a set on CGTI for sale £40
Any idea if they would fit the standard manifold/fuel rail??
-
You'll need bigger maf if your running red tops 3" if im right, 2.75" with yellows.
-
Nick didnt mention anything about a maf, il give them a ring tomorrow :smiley:
Are all the K03s the same fitment, oil/water lines etc etc ? throught out vw, seat, audi???
cheers
-
:smiley:
-
Right ive got a few tricks up my sleeve :smug: but im needing help :smiley:
*Im after a set of 380cc injectors... are there any vag cars that run these standard that would fit the golf 1.8t fuel rail etc!?!?
*Water meth injection, Who sells the cheapest kit these days!? OR has anyone got a list of things needed to D.I.Y the job?
*Are there any high flow/large port exhaust manifolds out there for the golf 1.8t!?
thanks in advance
Saab red tops with a 4 Bar FPR should cover it. I'm sure theres a set on CGTI for sale £40
Any idea if they would fit the standard manifold/fuel rail??
They are EV1 type injectors so yes they will fit the manifold.
They are £60 not £40 and i think the seller has posted wrong flow for them.
Click Here (http://www.clubgti.com/forum/showthread.php?t=249228&highlight=injectors)
-
Just had a little price up and I dont think its going to be fundable currently :cry:
are the K03s off the audi seat and vw all the same? :smiley:
thanks
-
yes mate as long as the engine codes are AUM or AUQ, mine is from a Leon Cupra :smiley:
-
Dave has some Saab reds for sale
-
Nick didnt mention anything about a maf, il give them a ring tomorrow :smiley:
Are all the K03s the same fitment, oil/water lines etc etc ? throught out vw, seat, audi???
cheers
Did you ring nick about the MAF chris??
-
Dave has some Saab reds for sale
Not any more unfortunately, they have gone!
Need to update sig!
-
You will defo need a bigger MAF with bigger injectors :wink:
-
Thought so was looking at Nick previous mentions about bigger inj with bigger maf. 2.75" Maf with my yellows, would I have to get new tip or modify my present forge one??
-
Right ive got a few tricks up my sleeve :smug: but im needing help :smiley:
*Im after a set of 380cc injectors... are there any vag cars that run these standard that would fit the golf 1.8t fuel rail etc!?!?
*Water meth injection, Who sells the cheapest kit these days!? OR has anyone got a list of things needed to D.I.Y the job?
*Are there any high flow/large port exhaust manifolds out there for the golf 1.8t!?
thanks in advance
Saab red tops with a 4 Bar FPR should cover it. I'm sure theres a set on CGTI for sale £40
Not good advice running static rail at 4 bar as once the car is on boost the spray pattern quality will be poor. Your need to remeber the rail pressure scales up with MAP-boost.
-
My mate who i used to work has a 1989 r32 gtr skyline that he's soon to be getting rid of after making it a 10 second car with 700 horses and now needing to get ahouse with his bird. he's constantly hammering into me to get a k04 or gt-28. BASICALLY wants me to run his water / methanol AEM set up which was for quite a respectable price on my car as he's putting it back to standard.
I know how / methanol injection as a mod onto cars other than see him fit and run it on his linesky. etc and the princeples behind it.
what i was hoping is does anyone know alot about it? how much has it been done on 1.8ts? and is the direct set ups for 1.8ts out there? just i want to go about this properly from those that have done it. :)
-
Shaft69, Jonrandom and maybe rockmonkey69 (i think) run one..
Pretty sure Chris. also did, also speak to R-Tech on phone, they have mapped a few with them.
I should have mine working by next weekend :cool:
I am interested if anyone can find a tubular exhaust manifold that will fit k03s/K04-001..
Must be one somewhere? :undecided:
-
I am interested if anyone can find a tubular exhaust manifold that will fit k03s/K04-001..
Must be one somewhere? :undecided:
shurrup dave... been looking everywhere... :grin:
-
Been looking everywhere for tubular manifold dave cant find on only for k04-022, spoke to xs-power last week they don't do one either. Seems only cast ones for k03/k04-001 mate. Found cast one with life time warranty from states most 3-6months.
-
Got a link, how much % better flow?
-
4 years too late unfortunately but there IS some floating about..
http://boardreader.com/thread/JBS_Tubular_K03_Manifolds_in_stock_921dX2ca9.html
or
http://www.tig-art.com/web/8888/nsf/ProLookup.taf?_function=details&_ID=147704&PF=13&did=1193&G=15706&lang=EN&SM=15706&_UserReference=4C9BC3E6454CE6004F6658C0
Badger5 also ports standard ones for £80 + return delivery :wink:
-
I've got a bigger cast manifold in the shed I still haven't fitted lol
-
What company from Wes? Is your shed kept unlocked :grin:
-
Spoke to race-spec today tubular manifold avaliable in 8weeks or so. Say as soon as come in all get sold, putting my name down for one.
-
Price / link?