GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: jamie16v on 13 March 2012, 17:33

Title: quick turbo favour needed..
Post by: jamie16v on 13 March 2012, 17:33

hello chaps, anyone who happens to have a turbo "off their car" and to hand, could  you see how far the wastegate opens by hand (while still connected to the actuator).
thanks, jamie.

Title: Re: quick turbo favour needed..
Post by: Toby on 13 March 2012, 17:36

any turbo? iv got a ko3 in the shed

Title: Re: quick turbo favour needed..
Post by: jamie16v on 13 March 2012, 18:05

that`ll do just fine mate!

Title: Re: quick turbo favour needed..
Post by: Toby on 13 March 2012, 18:06

pull the acctuator open and see how much it opens inside?

Title: Re: quick turbo favour needed..
Post by: jamie16v on 13 March 2012, 18:07

yep, exactly that please mate  :smiley:

Title: Re: quick turbo favour needed..
Post by: Dave_IOW on 13 March 2012, 18:14

in degrees (roughly) or mm? Its on an arm isn't it?

Title: Re: quick turbo favour needed..
Post by: jamie16v on 13 March 2012, 18:16

degree`s or mm... the flap inside is what i `m looking for mate.. please!

Title: Re: quick turbo favour needed..
Post by: Toby on 13 March 2012, 18:17

i dont have nothing to measure it my van is in for a service, so i have a courtesy car

fook it! sorry pal!

Title: Re: quick turbo favour needed..
Post by: jamie16v on 13 March 2012, 18:20

a rough guesstiamate will do mate..

Title: Re: quick turbo favour needed..
Post by: Toby on 13 March 2012, 18:24

id say between 9mm and 12mm  just looked, i can put my index finger flat in there.

Title: Re: quick turbo favour needed..
Post by: jamie16v on 13 March 2012, 18:31

great, about 25-30 degree`s roughly then?.