GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: ShoozY on 12 March 2012, 20:18

Title: experience with g60 fly and vr clutch conversion?
Post by: ShoozY on 12 March 2012, 20:18

hi all, just wondering what experiences you have had fitting or once fitted one of these conversion kits,

iv baught one of these : http://www.ebay.co.uk/itm/AUDI-A3-1-8T-TURBO-AGU-FLYWHEEL-CARBON-KEVLAR-CLUTCH-/260847192898?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cbbb44b42#ht_1732wt_1270

keeping a ling story short, the friction plate is fouling the bellhousing, anybody had any trouble fitting these kits?

My agu will not turn over because of the abouve clearence issues, i thaught these kits where meant to be a direct swap?

any ideas will be greatly recieved

Thanx.
ShoozY

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: Wazzzer on 12 March 2012, 20:28

says it's for a quattro fella, not the 2WD AGU...

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: AD1.8T on 12 March 2012, 20:34

Wow thats an expensive mistake ! Did you pay to get it fitted aswell ?

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: ShoozY on 12 March 2012, 22:11

my bad, the link is for refrance lol, had me worried haha, but ye, its just for reffarance..... any1 fitted there own?

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: topher on 12 March 2012, 22:12

dozens.. never had any issues.

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: ShoozY on 12 March 2012, 22:20

any ideas spring to mind as to why the pressure plate is fouling the bellhousing, evrything is bolted up as it should be, its just that its starting to seem like iv been supplied the rong stuff

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: ShoozY on 16 March 2012, 18:49

i contacted the company who suppliedme the kit, turns out i was supplied the rong stuff so they have offerd to do an exchange for another one aT THERE EXPENSE, this unit arrived earlyer today and actualy is smaller!!!,

i shall befitting the new unit early next weekso all is well

Title: Re: experience with g60 fly and vr clutch conversion?
Post by: jamie16v on 16 March 2012, 19:24

glad it`s sorted for you mate.. :smiley: