GolfGTIforum.co.uk

General => The garage => Topic started by: AntMk3GTi on 09 March 2012, 16:15

Title: Mk4 1.8T AUM stage 1 remap question
Post by: AntMk3GTi on 09 March 2012, 16:15

Hi

I've recently got a MK4 1.8t 150bhp with the AUM engine. Am I right in saying this has the K03s turbo and a stage 1 remap will see 200bhp?

If so, will it be ok to run the standard clutch set up with 200bhp? Ive got a receipt for a new clutch fitted less than a year ago so it'd be a shame to ruin it so soon if it cant handle the extra power.

Also, I'm planning on upgrading to a fmcl007p diverter valve. Is this a direct replacement, so exactly the same size as the stock one etc?

Thanks

Title: Re: Mk4 1.8T AUM stage 1 remap question
Post by: iowm3 on 27 April 2012, 00:35

Id like to know this also as iv just picked up a 2001 golf turbo with AUM engine?

Title: Re: Mk4 1.8T AUM stage 1 remap question
Post by: barrym381 on 27 April 2012, 00:40

get a forge 007 then have your car mapped, an the clutch should be ok   :smiley: an yes the aum has k03s

Title: Re: Mk4 1.8T AUM stage 1 remap question
Post by: oceanic-green on 27 April 2012, 14:29

I second what barrym381 says. I have a 2001 Aum, and just before I had it remapped the gear box went, so I had it replaced as well as the clutch and fly wheel (oem parts). Touch wood, my clutch has been fine since the remap, which was done about 22 months ago. What you are most likely to need to replace after a remap will be the pcv pipework under the inlet, and the diverter valve.

Title: Re: Mk4 1.8T AUM stage 1 remap question
Post by: shaft69 on 28 April 2012, 16:06

Be ok mine runs 231bhp and 250torque my clutch is fine (touch wood) still original on from new, and drive mine hard too.