GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: gti_boz on 26 February 2012, 18:12

Title: K04-001 setup... Advice needed
Post by: gti_boz on 26 February 2012, 18:12
I have a k04-011 turbo (so straight fit ment)
Saab red injectors
Front mount intercooler
Forge 007 diverter valve
3 inch bore full exhaust system
Cold air feed induction kit

I was just wondering will I need a vr6 maf housing? Also is there anything else you could recommend befor remap??

Cheers :)
Title: Re: K04-001 setup... Advice needed
Post by: Toby on 26 February 2012, 18:24
3" tip, n a mk3 golf ob2 vr6 maf.
Title: Re: K04-001 setup... Advice needed
Post by: gti_boz on 26 February 2012, 18:58
Quote from: Toby on 26 February 2012, 18:24
3" tip, n a mk3 golf ob2 vr6 maf.

Cheers mate :) thought I'd need the bigger maf, never gave the turbo pipe a thought
Title: Re: K04-001 setup... Advice needed
Post by: Dave_IOW on 26 February 2012, 19:02
Got Saab reds if needed :smiley:
Title: Re: K04-001 setup... Advice needed
Post by: gti_boz on 26 February 2012, 19:07
Where's the best place to get the 3" tip? Looked on eBay but not sure what size they are
Title: Re: K04-001 setup... Advice needed
Post by: Toby on 26 February 2012, 19:16
Iv got a badger 5 tip, i think theres a red ko4 tip in the clasifieds atm if it hasnt sold!
Title: Re: K04-001 setup... Advice needed
Post by: Dave_IOW on 26 February 2012, 20:32
Not the right one for a 001, a ko3s one you need...
Title: Re: K04-001 setup... Advice needed
Post by: Marc87 on 26 February 2012, 20:32
Sorry for going off subject but toby do you have a build thread as im interested in your intercooler setup
Title: Re: K04-001 setup... Advice needed
Post by: Toby on 26 February 2012, 21:14
Its on page 2 on mk4  agu ko4

Tbh im guna get all the pipes done in alloy when iv got it mapped!!

Iv wasted so much money  :laugh:

Get a forge tip.
Title: Re: K04-001 setup... Advice needed
Post by: Ashmond on 27 February 2012, 10:46
check my buildthread, think we got same cooler.