GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Dis00 on 23 May 2005, 16:27

Title: drill size
Post by: Dis00 on 23 May 2005, 16:27

bought some components and want to fit them but have heard that the orginal ones need drilled out so you can screw the new ones in does anyone know the correct size drill bit

Cheers Deano

Title: Re: drill size
Post by: richy on 24 May 2005, 13:13

erm... what components are you talking about?   :huh:

Title: Re: drill size
Post by: Dis00 on 25 May 2005, 00:51

the original vw speakers are not screwed in and the only way to change them is to drill them out and need to know what drill bit to use

i bought the alpine sps171a

Title: Re: drill size
Post by: topher on 25 May 2005, 08:47

well that all depends on the size of the screws you've bought to fix the new speakers in doesnt it :grin:

unless you're talking about the rivets.. in which case just use a 6mm to pop the head off the rivet then knock it through.