GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Chris_mk4_golf on 22 February 2012, 23:00

Title: Mk2 20vt fuelling
Post by: Chris_mk4_golf on 22 February 2012, 23:00

Hi guys hope you can help

Im currently going through a mk2 20vt conversion and have stumbled into a somewhat confusing area im not familiar with

I dont know what kind of set up to go with for fuelling

Im going to be running a KO4-022 with badger5 TIP (v1), baileys DV, FMIC, 3" MAF so far

Ive no idea what kind of pump to go for

3bar/bar regulator?
what injector size should i go for?

What set ups have you gone for with what power results?

Many thanks

Title: Re: Mk2 20vt fuelling
Post by: Chris_mk4_golf on 23 February 2012, 00:23

Bump?

Title: Re: Mk2 20vt fuelling
Post by: danny_p on 23 February 2012, 23:07

what power output are you going for ?    from that you can aproximte your fuel requirements to size your injectors

run ether a 3 or 4 bar reg just size the injectors accordingly

id use ether a bosch 044 or a walbro 255   uprated  pump to allo for more in the futcher


but a mk2 16v kjet pump will be ok on a 4 bar FPR with   injectors from a 225 engine  iirc 380 ish  cc/m   if buying them new would prob go for 400 or 450's