GolfGTIforum.co.uk

General => The garage => Topic started by: LowlifeDubber on 21 February 2012, 14:12

Title: Welding on a seat subframe with airbag installed.
Post by: LowlifeDubber on 21 February 2012, 14:12

Now then,im just about to modify my new seats and i have to weld to the existing subframes.
Problem is,to separate the subframe from the base or to remove the airbag,the whole bloody seat has to come apart and its a stupidly long job and all the clips are liable to break.

How safe is it to weld to the subframe with the airbag still attached?

Cheers :cool:

Title: Re: Welding on a seat subframe with airbag installed.
Post by: danny_p on 21 February 2012, 20:30

unless you weld through the wires going to the det cap it not going to go off

Title: Re: Welding on a seat subframe with airbag installed.
Post by: LowlifeDubber on 21 February 2012, 20:34

Quote from: danny_p on 21 February 2012, 20:30

unless you weld through the wires going to the det cap it not going to go off

Just what i wanted to hear mate,thanks very much!
I had a feeling you would know.Welding shall commence in the morning then. :cool: