GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: 01664gti on 14 February 2012, 22:04
-
Hi all
I need a mk2 16v p/s pump but cant find one but have been offered a mk3 16v one if it will fit.
Anyone know if it will or any other i could look out for??
cheers in advance
-
I am sure the pulley is different on the mk3 one but you may be able to swap that over, not sure if 8v is the same.
-
8v is the same, Corrado is also the same. But mk3 uses ribbed belts not v belt, so you've got to change a fair bit too use it
-
ok cheers ill start looking then
-
.
-
Shaft on a 16V is shorter than a 8V to be clear there is defo a difference in shaft lengths!
-
.. to be clear there is defo a difference in shaft lengths!
Bum Start?
(http://i482.photobucket.com/albums/rr182/the_flying_elvi/4986448_gal.jpg)
-
Shaft on a 16V is shorter than a 8V to be clear there is defo a difference in shaft lengths!
Nothing that can't be spaced out :) I've got a 16v pump on my 8v
-
.. to be clear there is defo a difference in shaft lengths!
Bum Start?
(http://i482.photobucket.com/albums/rr182/the_flying_elvi/4986448_gal.jpg)
Jeez man didn't you get breast feed enough as a pup Jon :evil: :drool:
Yeah spacers can be used it's only about 10mm-15mm difference!