GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: dubpirate on 09 February 2012, 20:02

Title: raplacing the ignition loom
Post by: dubpirate on 09 February 2012, 20:02

has anyone ever done this

iv bought a new one

so i can remove this sh!tty push button start

were do all the wires go

obv theres 3 plugs that go into the ignition barel and column

were is the other ends of these go

Title: Re: raplacing the ignition loom
Post by: Dan_GTi8v on 10 February 2012, 14:11

have a look at this

http://www.a2resource.com/electrical/CE2.html

according to that it is positions H1 H2 and J in this diagram

(http://www.a2resource.com/electrical/images/CE2.gif)

full ignition loom though I thought had more than 3 plugs at the steering column, all the stalk controls should be up there somewhere too, unless you are only replacing what needs to be replaced, but in that case from memory there are only 2 plugs fusebox end hat needs to be changed

have a look at the link and work it out :P

Title: Re: raplacing the ignition loom
Post by: Wayne on 10 February 2012, 23:50

Why not rip out the push start and tidy the wiring or is it a mess.

Title: Re: raplacing the ignition loom
Post by: dubpirate on 11 February 2012, 13:31

ust bought a new ignition loom pal guna rip it out and put all back to standard

Title: Re: raplacing the ignition loom
Post by: Wayne on 12 February 2012, 00:07

Quote from: dubpirate on 11 February 2012, 13:31

ust bought a new ignition loom pal guna rip it out and put all back to standard

Good luck with sorting it :afro: