GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: navmk4gti on 07 February 2012, 14:56
-
Will a mk4 r32 dsg dogbone mount fit a golf mk4 1.8t agu??
-
Yep shud do
-
I can get one for 15 quid. Im Gonna just bite the bullet and get it hope it fits mines knackerd
-
if not just sell it on lol
-
Lol tru :grin:
-
I actually heard they don't fit...but still buy it and sell it to me :wink: :grin: :evil:
-
Done some Googling done think does :sad:
-
Defo do mate ive fitted one on my AGU :smiley:
-
It doesnt have the extra metal bit on it like the AGU one but it still fit fine.
-
It doesnt have the extra metal bit on it like the AGU one but it still fit fine.
wikid so it fitted.. how is it like mate?? what you mean extra metal bit :undecided:..to be honest looks identical to me then my one just looks like bushes part tiny bit chunkier and more stiff :lipsrsealed:
-
(http://i1138.photobucket.com/albums/n521/jonrandom/IMAG0254-1.jpg)
This was from my agu and my one from the R32 didnt have the metal bit on the RHS.
My car is still being built in my garage so havent driven it, so havent felt the benfits yet mate.
-
Mine was exactly the same as the mount I took off the car :huh:
-
(http://i1138.photobucket.com/albums/n521/jonrandom/IMAG0254-1.jpg)
This was from my agu and my one from the R32 didnt have the metal bit on the RHS.
My car is still being built in my garage so havent driven it, so havent felt the benfits yet mate.
Thats probably because yours is broken then and it's snapped off! The extra bracket should be there.....
-
The dsg one i have has the metal bit on end mate think yours is bust :lipsrsealed:
-
:sad: well that's a fu*ker, it didn't look like anything had snapped off will have to check it.
-
You may be able to take it off your old one as looks like bolted on from bottom not sure tho
-
From what i remember i couldn't take it off as i did look to do it pretty sure it was all attached to the bush will have check again
-
The little metal plate comes off with the mount . I think all the little metal plates are the same right across the range of mk4 engines. Its just the bush and bush stiffness that differs
-
The little metal plate comes off with the mount . I think all the little metal plates are the same right across the range of mk4 engines. Its just the bush and bush stiffness that differs
Yh ur ryt it is on just by the bush should be able change it easily then as you can buy bushes for that seperate
-
Nice will look in to it :smiley: