GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Chris. on 05 February 2012, 20:33
-
Hi,
Considering selling my parts for golf....although it will take a LOT for me to split things.
Can someone give me a price of selling this list? (ive put the prices I think)
K03s turbo - £200
Full turbo back exhaust with remus backbox - £175
Gearbox £150
Shafts £75
Forge Intake pipe £80
Pipercross panel filter AGU smoothed airbox and cold air feed £45
Genuine MAF with uprated housing or stock £60
New N75 valve £25
Manifold £30
Injectors - £40
THS cooler £375
R-tech mapped ECU (over 12 hours mapping) £300 proven 248bhp / 278lbft
312mm brakes with new discs and pads £150
Hubs £70/pair
Engine £400 with alternator/powersteering/ etc
Other various parts for 1.8T conversion £50 (clutch MC feed line, throttle cable, silly sensors etc)
Clutch £120
Inlet £30
Throttle body £30
Uprated Actuator £85
Uprated 007p £65
coilpacks (3 month old) £100
Ignition amp £80
Bits of pipework for AUM models to replace leaky seals £20
Engine loom £35
Clocks/key £30
Linkages £25
Edit/adjust prices to what you think is right. Nothing is over a years old - all genuine sensors, solid mass flywheel and clutch.
Thanks
NOTE.....NOTHING IS FOR SALE, i just want prices.
-
I take it you want to know if your car worth more in bits? I know mine is :laugh:
-
I take it you want to know if your car worth more in bits? I know mine is :laugh:
ditto :grin: :grin:
-
I know its worth more in bits. Definately not able to sell the car anymore haha
Just after a 'realistic price of parts tbh'
-
seems goos prices mate ul get loads of interest specially in the ecu i think haha
-
And you get people on other local forums who think im a dreamer for asking £2400 for the lot. They fair prices I reckon especially from my judgement.
-
i agree all seem fair prices imo
EDIT.. are these posted prices
-
they are great prices, plus all the other little things that you forget or dont think about all add up too. i broke mine in December and has proved to be worthwhile for me, i even bought 2 more to break :evil:
if breaking complete car, you can expect ROUGHLY these prices for these:
glovebox 35
gear shifter 35
cupholder 20-30
boot latch 20 (yes it suprised me too!)
parcel shelf 30
headlights 40 the pair
rear lights 40 the pair
bonnet catch 15-20
lambda(s) 20
wing mirrors 40 the pair
theres a nice 300 ish to add to your list
andy
-
how did you managed to get 248bhp and 278lbft!? was it just from the exhaust, forge tip, fmic and actuator!? or was there anything else!?
cheers
-
Seems very fair prices to me :afro:
-
i agree all seem fair prices imo
EDIT.. are these posted prices
No, all plus a few quid postage.
AndyJ - got 2 sets of lupo stubbies aswell
-
you not doing another mk4 then i take it chris
-
Will be, just testing the water this way first.
If it goes: 1.8T project engine, big turbo, water meth, big power......altho i want to try slow down a bit. Next is water meth on k03s.
-
:cool: look forward to seeing this mate
-
Depends what happens....need a set of rods ideally.
-
theres BAM rods on ebay for £210, not sure if thats a good price or not but know the BAM bottom end can take a healthy amount of torque
-
theres BAM rods on ebay for £210, not sure if thats a good price or not but know the BAM bottom end can take a healthy amount of torque
The rods are still the weak point on the BAM engine may as well spend the extra £100 and get proper forged rods then your good for whatever torque you can throw at it.
-
If I can find a bottom end of block I can rebuild my old one with rods ready for water meth.
-
Ha there's nothing there I need (which is probably a good thing)
-
Haha. Id consider splitting it if I knew parts would go quickly!