GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Mcleod on 04 February 2012, 18:08

Title: Antiroll bars
Post by: Mcleod on 04 February 2012, 18:08

See if you lower the mk4 lower then 40mm what sort of antiroll bar is needed and where is the best place to get them from?

Title: Re: Antiroll bars
Post by: T18:LPR on 04 February 2012, 18:21

ebay shops, they seem to be cheaper than every where else, im running the FK one on the front & does the job fine, no rub with a 50mm drop

Title: Re: Antiroll bars
Post by: Steve_PD on 04 February 2012, 18:22

You need one which goes under the driveshaft.
R32
MK1 TT
S3

Available from the dealers, breakers, eBay, forums etc.

Aftermarket one is whiteline from various tuning retailers, ebay, forums etc.

Title: Re: Antiroll bars
Post by: cullygti on 04 February 2012, 18:56

Quote from: T18:LPR on 04 February 2012, 18:21

ebay shops, they seem to be cheaper than every where else, im running the FK one on the front & does the job fine, no rub with a 50mm drop

i got this to im slammed and it dont work keeps catching drive shaft first as last get a tt or r32 one to save the dissapointment later on  :wink:

Title: Re: Antiroll bars
Post by: Mcleod on 04 February 2012, 19:47

Is the ones for the Audi s3 and tt standard? Like just ones you can get from dealers or part websites?

Title: Re: Antiroll bars
Post by: Mcleod on 04 February 2012, 20:01

Also what sort of year s3 would it need to come off?

Title: Re: Antiroll bars
Post by: Mcleod on 08 February 2012, 14:28

Do you only need the front or do you need both front and back?