GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: navmk4gti on 04 February 2012, 01:03
-
Iv seen a few decats on ebay for my agu... I see some come in two pieces ans some just one whole piece whats that all about?? Also most them are 3" im
After 2.5" anyone got link to one cant find fook all :undecided:
-
the ebay ones are 3" then they go down to the size u want
-
I have a 3" cat back at the mo so should fit but wont i get sh1t loads lag as only on ko3 turbo would have thought 3" downpipe be to much :lipsrsealed:
-
im running the ko3s and i aint got any lag with the 3" straight through if anything made it spoil alot faster i would go 3" straight through like the one me and dave iow got and the one wolverine is selling
-
Hmm ill get the 3" ebay one den see how goes :smiley:
-
3" FTW!
-
Is this worth it guys cheapest can find with gaskets etc :smiley:
(http://i253.photobucket.com/albums/hh60/naveedali1/photo1-4.jpg)
-
Yep, nothing wrong with that one
-
i got that one havent put it opn yet but thipnk might have top get my local exhaust lace to get it fitted as dunno it will fit as going to a 2.5 inch miltek anyone fitted one
-
i got that one havent put it opn yet but thipnk might have top get my local exhaust lace to get it fitted as dunno it will fit as going to a 2.5 inch miltek anyone fitted one
You can get 2.5" in it too ...whats quality and welding like on it mate? Im sure any exhaust place can weld it on mate without probs using reducer at end it :wink:
-
My Stainless Steel straight through exhaust system from my AGU is for sale on ebay with a decay, it's at £51 now. If you're interested :)
-
My Stainless Steel straight through exhaust system from my AGU is for sale on ebay with a decay, it's at £51 now. If you're interested :)
Already have a cat back custom sytem bud dont wana replace that.. Unless you willing chop off decat and downpipe den im interested :grin:
-
Iv managed win one on bidding for 50 quid brand new. Says it does
Not come with gaskets and bolts. What
Gasket will i need for AGU and bolts i gues can just get from dealers??
-
It will be missing the gasket that joins the decat pipe together.....just use some gasket paste.
-
Oh right wont a standard one fit or has to be for 3".. Iv had a
Look on the bay loads diferent types dont realy know
Im looking for anyone got a pic or link to one :undecided:
-
Standard one will fit.
Go to VW, ask them for a 1.8T turbo / downpipe gasket - give them about £3.50 and be happy :)
-
Sweeeet. Thanks bud going to be poping over
To dealers tomorow then. Ill get bolts too :smiley:
-
do they mean the gasket and bolts that joint the two halfs togeather?
-
do they mean the gasket and bolts that joint the two halfs togeather?
I presume so as comes two parts :undecided:
-
can someone send me pic of the gasket i need please
-
Where it joins together in the middle just use paste like Chris said, you'll just need a gasket to join to the turbo
-
Where it joins together in the middle just use paste like Chris said, you'll just need a gasket to join to the turbo
yh mate i need pic for gasket onto turbo .. theres 4 hole on eand 3 not sure agu one is i dont want dealers fook it up like they have in past this stuff :grin:
-
Ny1 need it tonyt before head dealers morning
-
It's the 4 hole gasket you need
-
Right this what got from dealers it dot look right at all as i thought. Took me hour of them searching as they said is no gasket then came
Up with these>>>>
One gasket is tiny the 4 hole one looks right can someone shed some light on this and the bolts and nuts look odd too :undecided:
(http://i253.photobucket.com/albums/hh60/naveedali1/photo1-5.jpg)
(http://i253.photobucket.com/albums/hh60/naveedali1/photo2-4.jpg)
(http://i253.photobucket.com/albums/hh60/naveedali1/photo3-1.jpg)
(http://i253.photobucket.com/albums/hh60/naveedali1/photo4-2.jpg)
(http://i253.photobucket.com/albums/hh60/naveedali1/photo5-2.jpg)
-
your dealers are rubbish...
The gasket in the first pic is for the turbo to manifold which you don't need. They have also given you turbo exhaust studs, you may need them though as they can snap. But you'll only ever need four lol. The nuts are right albeit too many (again you only need four)
-
Also there is no dealer part for the join in the decat, on the standard pipe this is one piece. Just use some paste on that joint and 3 random nut/bolt combination. Try not to use nylocs though as they could get too hot and melt
-
the bolt/studs- you use 4 they go into the turbo (where the exhaust butts up to) thats if you are removing the old studs when you remove old nuts to remove old dp (one of mine snapped when i removed mine so good you got new ones just in case)
gasket with 4 holes - this goes between dp and turbo (slips onto bolt/studs that stick out the turbo)
nuts - after putting dp onto turbo, tighten nuts to hold it on!!!!
3 hole gasket - might fit between both pieces of the dp
-
There more then rubbish they dont know fook all :angry:
Yh the small one is supose go between cat and downpipe but its so small doesnt look like it is going to fit. Will i need any bolts or screws to put decat and downpipe together or just that sealent you on about and use bracket hanger from old cat downpipe connection :undecided: Im not going to fit it chris is going to do it just wana make sure have evrything for the job on tuesday :smiley:
-
There more then rubbish they dont know fook all :angry:
Yh the small one is supose go between cat and downpipe but its so small doesnt look like it is going to fit. Will i need any bolts or screws to put decat and downpipe together or just that sealent you on about and use bracket hanger from old cat downpipe connection :undecided: Im not going to fit it chris is going to do it just wana make sure have evrything for the job on tuesday :smiley:
Am i? lol :D
-
There more then rubbish they dont know fook all :angry:
Yh the small one is supose go between cat and downpipe but its so small doesnt look like it is going to fit. Will i need any bolts or screws to put decat and downpipe together or just that sealent you on about and use bracket hanger from old cat downpipe connection :undecided: Im not going to fit it chris is going to do it just wana make sure have evrything for the job on tuesday :smiley:
Am i? lol :D
Loll not u :grin:
-
Was gonna say, long drive but ill do it hahaa
-
bolts as well as paste mate :wink:
-
paste and duct tape!!!! :grin:
-
so i need bolts too? fookin knew dealers missed something.. im going to have to go tomorow and order them too then :angry:
-
will i need the paste as i got the gasket instead now aint i :undecided:
-
nooooooooooooooooooooooooooooo
the bigger gasket of the two is for the turbo to downpipe join. You need this.
the nuts are for the turbo to downpipe join, you need four.
the studs are for the turbo to downpipe join. You may need these, depends if any snap while taking the old nuts off
the decat you have has a join half way along for ease of fitting. The gasket that goes in between these joins is missing as per the auction details. You won't find these at the dealers as the standard pipe is one piece. Use paste in there instead of the gasket.
You will also need to find 3 nuts/bolts yourself for this join from a hardware store. Don't use nylocs in case these get too hot and melt. I would get a bolt and two standard nuts so you can lock them on
-
:laugh:
ohhhhhhh my bad its the dealers have ticked me right off :lipsrsealed: :angry:
iv got sh!it load bolts and nuts and home ill find some and see fit in :grin:
i realy need find another vw dealer close by
-
sorry I don't mean to be condescending :lipsrsealed:
-
sorry I don't mean to be condescending :lipsrsealed:
:grin: :grin:
its kool waz.. thanks for help guys .. will see how goes on tuesday cant wait .. hope sound improves :grin: