GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: cullygti on 01 February 2012, 22:05

Title: what size pipe
Post by: cullygti on 01 February 2012, 22:05
hello ppl what size pipe is needed for catchcan install on agu can as got 19mm fittings so 19mm is obvious but is there another size needed besides this and how much of each in metres would i need was thinking 2 metres  cheers guys  :smiley:
Title: Re: what size pipe
Post by: symsymma on 01 February 2012, 22:09
19mm or 3/4 id hose,used just under 2 meters on mine.check out posts on the best place to mount catch can about 5 topics below mate. :smiley:
Title: Re: what size pipe
Post by: Wazzzer on 01 February 2012, 22:11
make sure it's oil resistant hose too  :wink:
Title: Re: what size pipe
Post by: cullygti on 01 February 2012, 22:12
yeah just had a look cheers mate just wanted to clarify if i needed another size pipe ie 15mm etc for agu or is it all 19mm
cheers wes will do fella  :wink:
Title: Re: what size pipe
Post by: jonnyturbo on 01 February 2012, 22:12
Lol cully i have 2 metres of black 19mm ID, 3 ply silicone here. Brand new its also corrison resisant
Title: Re: what size pipe
Post by: cullygti on 01 February 2012, 22:13
cheers jonny but wanting blue thanks again
Title: Re: what size pipe
Post by: symsymma on 01 February 2012, 22:14
Only 19mm req mate i used 1 elbow and 1 t piece also.
Title: Re: what size pipe
Post by: jonnyturbo on 01 February 2012, 22:15
Np cully
Title: Re: what size pipe
Post by: cullygti on 01 February 2012, 22:18
cheers guys much appreciated  :cool: