GolfGTIforum.co.uk

General => The garage => Topic started by: Chris. on 01 February 2012, 21:37

Title: Need a bit of help - APY revo stage 2
Post by: Chris. on 01 February 2012, 21:37
I have a mate who has a S3.  He bought a stage 2 revo ECU for it, same part number same everything.

Now running the ECU he has a lot of overboost/surging from the ecu. 

We have tried all new sensors, maf, coils, etc

At 3/4 throttle, the car is dumping off with the dump valve opening and dropping boost.  N249 is bypassed and direct feed from inlet to DV.  With the vacuum pipe connected, we see 200g/s air flow....with it DISCONNECTED, the car runs smooth, but only pulls 143g/s

Has anyone got any ideas why this is?

Chris
Title: Re: Need a bit of help - APY revo stage 2
Post by: RTechUK on 01 February 2012, 22:18
Are you sure its Revo dude?  In most cases when you plug it in the car the map will need to be switched on via the Revo SPS tool.

Do logs of blocks 20 114 115 and email me them. 

Nick
Title: Re: Need a bit of help - APY revo stage 2
Post by: Chris. on 01 February 2012, 22:55
He says it revo.  Apparently a stage 2 map, but his car is near enough standard...uprated DV on it.  I cant see it making a difference though.

Switching a map on...thats a new one to me.

Will let him know what to log,
Title: Re: Need a bit of help - APY revo stage 2
Post by: RTechUK on 03 February 2012, 22:28
He says it revo.  Apparently a stage 2 map, but his car is near enough standard...uprated DV on it.  I cant see it making a difference though.

Switching a map on...thats a new one to me.

Will let him know what to log,

Revo maps have extra code added to the end for the file which hold some fancy sh@t...lol  You can buy a Revo sps switch and adjust the boost/load Timing and fuel buy plugging in the obd ports and twisting knobs...lol

If the stage 2 is too much, this it can be turned down to a safe limit.

Nick
Title: Re: Need a bit of help - APY revo stage 2
Post by: AaronGS on 04 February 2012, 08:32
what spring has he got in the dump valve?
Title: Re: Need a bit of help - APY revo stage 2
Post by: CorradoVR6-Turbo on 04 February 2012, 12:27
Hi there,i firgured it would be best for me to register,im James Chris's mate with the fecked S3  :undecided:

Ive done some logging today,with the blocks requested but unsure if they are what needed as the blocks differ from early S3 like mine to later ones,so i had done a couple more with some other blocks for you to look at and see if you can make scene of it all ...

The diverter valve had two springs ,standard and uprated one,both make little to no difference at all.

Right im stumped...how do you load word files on here?

My mate has a sps3 for his stage two audi s3(my old car) but wont be back for a few weeks,the map is working,its defo quicker than before just this mid throttle surging ... :undecided:

Thanks for your help guys am at my ends with this car! :cry:

Title: Re: Need a bit of help - APY revo stage 2
Post by: CorradoVR6-Turbo on 04 February 2012, 13:13
http://www.2shared.com/file/YpUrl9Rs/LOG-01-011-118-115.html
http://www.2shared.com/file/itSgSm5k/LOG-01-020-114-115.html
http://www.2shared.com/file/48CI3iGn/LOG-01-002-101-011.html

this is the only method besides e mail i can get you lot to see the logs...its a arse soz  :drool:
Title: Re: Need a bit of help - APY revo stage 2
Post by: CorradoVR6-Turbo on 06 February 2012, 21:16
anyone...? pleasssseeeeeeee   :undecided:
Title: Re: Need a bit of help - APY revo stage 2
Post by: Chris. on 10 February 2012, 01:57
Bump!!!