GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: cullygti on 28 January 2012, 16:22
-
hi guys anyone know part number for agu injector seals cheers
-
Ones that screw into the inlet: 058 133 555
O rings:
(http://i93.photobucket.com/albums/l42/carsey2006/ETKA/injectorAGUring.jpg)
-
Or do you mean the seats that screw into the inlet manifold?
-
Covered them both ;)
-
Sorry, stupid phone cut off the part number bit of the pic
-
see in that pic the circlip that holds the fpr in,if i remove that does the fpr stay seated until i pull it out?
-
cheers guys much appreciated not sure which bit i need sure its just the o ring as chris said but il figure it out :cool: thanks again fellas
-
see in that pic the circlip that holds the fpr in,if i remove that does the fpr stay seated until i pull it out?
Yes it does but careful as the fuel is still under pressure so it can pop out
-
if i open the fuel flap will that release pressure? or will there still be a wee bit there?
-
nah it's after the pump so it won't make any difference. Just leave the car for an hour or so before you do it and the pressure should have eased off. Just mind your eyes lol
-
cool ta
-
Stick a rag over it while pulling out.