GolfGTIforum.co.uk

General => The garage => Topic started by: Darksider1.8T on 25 January 2012, 22:34

Title: fitting a WOT box?
Post by: Darksider1.8T on 25 January 2012, 22:34

how hard are these to fit to a AGU 1.8T? ive got instructions but iam crap at wiring, has anybody got one fitted or willing to fit it me for a fee?

Title: Re: fitting a WOT box?
Post by: Darksider1.8T on 27 January 2012, 10:12

anybody?

Title: Re: fitting a WOT box?
Post by: golf-sib on 27 January 2012, 19:47

Location helps, also what engine code you got. If its an engine with the 7.5ECU onwards you can get a tuner to setup launch control which in turn would do what the WOT box does.

Title: Re: fitting a WOT box?
Post by: topher on 27 January 2012, 19:48

read the 9th word of the first post again :tongue: :grin:

Title: Re: fitting a WOT box?
Post by: golf-sib on 27 January 2012, 19:51

Quote from: topher on 27 January 2012, 19:48

read the 9th word of the first post again :tongue: :grin:

The "if"? He could have the 3.8.3... what was the 3.8.2 on bmw's?

Title: Re: fitting a WOT box?
Post by: topher on 27 January 2012, 19:54

the first post, not your post. long day dude? lol

Title: Re: fitting a WOT box?
Post by: golf-sib on 27 January 2012, 20:00

LOL! Surprisingly I was off work today, yeah its an AGU how did I miss that  :undecided:

Title: Re: fitting a WOT box?
Post by: Darksider1.8T on 27 January 2012, 20:57

lol
yep 1.8t agu so the older ecu and have to have a little blue box that cuts the ignition anyone want to fit it me?

Title: Re: fitting a WOT box?
Post by: Darksider1.8T on 29 January 2012, 21:30

nobody then?

Title: Re: fitting a WOT box?
Post by: RTechUK on 30 January 2012, 16:19

WOT box and uprated Rods needed.  :wink:  Its common to have bent rods with WOT box and the sporadic combustion,  80% are fine but if you have a inperfection with one of your rods then bye bye engine block. 

Title: Re: fitting a WOT box?
Post by: Chris. on 30 January 2012, 18:31

I was looking at WOT boxes the other day, and wondered how they would wire in as I dont think I have a clutch sense switch.
Shame id need rods.....maybe if I find a crank ill build a forged lump!

Title: Re: fitting a WOT box?
Post by: Darksider1.8T on 01 February 2012, 08:56

ive got Backdraft Motorsport rods fitted, do you think ive got a clutch sense switch fitted?