GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: pickles on 19 January 2012, 13:14
-
went to replace some vacuum hoses and manage to snap off nipple whilst taking the one time clip off :(, could i plug this hole and T in some wr else, its the line between the DV and air intake, the fpr line is located next to it.
-
yeah you can, i tapped it out and used JB weld and put a bolt into it......
i was removing this thou when i done catch can install
yeah tee into FPR hose
-
yeah you can, i tapped it out and used JB weld and put a bolt into it......
i was removing this thou when i done catch can install
yeah tee into FPR hose
cheer m8, might have to do it yet, managed to jam a section of tube inside the hole and jammed the nipple over that, was the red tube from a wd40 can lol, had to chamfer it down a bit with a stanley tho to get a nice snug fit, just hope it doesnt pop off
-
just to note i got this sorted and also, when i was extending my boost gauge hose i dint have anything to connect the hoses so ended up using the tube from a lolly and tie wrapping it tight, seems all is well :)