GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: mjamoose on 16 May 2005, 11:10
-
Hi there one and all!
I've recently discovered that my reversing lights do not work!
Have checked all the wiring, fuses and bulbs all are ok, even shorted the reversing light switch connector and they worked.
I was wondering, how easy is it to replace the switch, does anything need to be done inside the gearbox. what tools will be needed and how much is it likley to cost me?
Any help appreciated greatly!
-
unpug your old one, un bolt it, buy a new one for a few quid from gsf, screw new one in and away you go!!! i swear i told you to do this when you asked first time?! :rolleyes:
-
I have the same problem but where is the switch?? silly question I know but the picture in the haynes manual is not that clear is it in the engine bay or do you reach it from under the car? :huh:
-
its on top of the gearbox, with two rubber booted wires coming out the top. not sure on all gearboxes but on an 020 box its right by the speedo cable drive.
-
Thanks for that ,another job for weekend!!!