GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: jezza16v on 13 January 2012, 10:53
-
Hi All. I have a single wiper conversion on the mk2 (89 small bumper) and I want to convert it back to standard. Are all Mk2 wiper mechanisms the same? There's loads on ebay for around £30, they don't all appear to be the same but that could just be the picture angles, any advice on this matter would be most welcome. :smiley:
-
No they are not all the same...
Is yours a CE2 or CE1 car (Hazard is it on the steering column or on the dash?)...
-
I've done this and there's about three different ones. The really early cars had the left hand driver one and 90 spec cars had one that looks like the mark 3 one which is a self contained assemply. The one you need one of the arms is only connected at one end.
edit I appreciate thats not the best description I'll try and link one when Im not at work. Ebays blocked.
-
I've done this and there's about three different ones. The really early cars had the left hand driver one and 90 spec cars had one that looks like the mark 3 one which is a self contained assemply. The one you need one of the arms is only connected at one end.
edit I appreciate thats not the best description I'll try and link one when Im not at work. Ebays blocked.
Thats the 3 versions I was thinking about....
The early Left Hand sweep.
Later (Pre 90 (88+)) spec that has smaller wiper boss & 10mm nuts and the
Post 90 Spec (Post 89) that has the larger boss and 13mm nuts...
-
Thanks chaps, this is a late small bumper with the hazards on the dash. So I'd better be very careful it seems......? :smiley:
-
Thanks chaps, this is a late small bumper with the hazards on the dash. So I'd better be very careful it seems......? :smiley:
PM Sent...