GolfGTIforum.co.uk
General => General discussion => Topic started by: Sam on 26 December 2011, 12:14
-
Whats peoples opinions on them, ok for a daily hack? Are they safe? Say taking 5 x 112 to 114.3
-
I know loads of people with them, no issues at all, I would say they are safer than adaptors.
-
i run them on my golf and ive never had a problem with them,never came loose or stretched and dont get any wheel wobble :cool:
but they are only designed for 2mm of difference so you would be pushing it on those sizes.
-
i run them on my golf and ive never had a problem with them,never came loose or stretched and dont get any wheel wobble :cool:
but they are only designed for 2mm of difference so you would be pushing it on those sizes.
Yer 2 mm per bolt though isn't it? Meaning that they allow for a 4mm difference in total in pcd
-
i run them on my golf and ive never had a problem with them,never came loose or stretched and dont get any wheel wobble :cool:
but they are only designed for 2mm of difference so you would be pushing it on those sizes.
Yer 2 mm per bolt though isn't it? Meaning that they allow for a 4mm difference in total in pcd
No! The 5x112 etc is from the centre bore to centre bolt hole. So each bolt would have to go 2.3
-
The term PCD stands for (pitch circle diameter) and is the diameter of a circle drawn through the centre of your wheels bolt holes. PCD is measured in millimetres and also indicates the number of studs or bolts the wheel will have.
-
i run them on my golf and ive never had a problem with them,never came loose or stretched and dont get any wheel wobble :cool:
but they are only designed for 2mm of difference so you would be pushing it on those sizes.
Yer 2 mm per bolt though isn't it? Meaning that they allow for a 4mm difference in total in pcd
Don't think so I believe they allow a max 2mm adjustment in total so 4x98 to 4x100 etc.
-
it's 2mm total.
-
def 2mm total sam but i have seen plenty of jap wheels on mercs and audis so i suspect they are bending them slightly!
have a look towards the vauxhall end they are 110 although centre bore is usually small unless aftermarket i suppose)