GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: donno on 16 December 2011, 18:33

Title: Golf iv 1.8t agu motor ,ignition amp module/amplifier
Post by: donno on 16 December 2011, 18:33

Hi Al

I would like to know if you should put thermal compound on the ignition amp when fitting the part back on the airbox.Many thanks for any advice.

Title: Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
Post by: jamie16v on 16 December 2011, 18:37

yes!

Title: Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
Post by: blade4real2004 on 16 December 2011, 19:01

Yes that what I used helps with the transfer of heat

Title: Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
Post by: CarlGallagher on 16 December 2011, 20:12

DEFO!!!! lad i purchased my agu off did not put the heat conductive paste on and sure enough on a hot summers day it went.

Title: Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
Post by: Wazzzer on 16 December 2011, 20:58

yep and buy some good stuff too :wink: