GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: pickles on 12 December 2011, 18:24
-
http://by151w.bay151.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=85956a18-24ed-11e1-ab82-00237de41626&Aux=0|0|8CE8711723F6650||0|0|0|0||&maxwidth=220&maxheight=160&size=Att
dunno if u can see the above link, but i bought the kit from here http://www.toyosports.co.uk/cold-air-induction-intake-18t-golfjettagti--octavia-3999-519-p.asp
had to cut the metal pipe to allow it to fit just behind my battery btw
just wondered what the hose and additional filter will be for, could it be no longer used because ive had to cut the pipe perhaps ?
-
bump
-
Its a breather filter :wink:
-
Its a breather filter :wink:
for where tho and what about the blue hose
-
Its a breather filter :wink:
for where tho and what about the blue hose
The blue hose and adaptor go into the end of the SAI pipe, you should have a small stub on the metal pipe that it fits on, if not just fit the small filter into the end of the SAI pipe.
-
Its a breather filter :wink:
for where tho and what about the blue hose
The blue hose and adaptor go into the end of the SAI pipe, you should have a small stub on the metal pipe that it fits on, if not just fit the small filter into the end of the SAI pipe.
cheers, ive had to hacksaw the pipe to enable it to fit and iv cut this stub off i believe, where this sai located if u dont mind :)
-
Its a breather filter :wink:
for where tho and what about the blue hose
The blue hose and adaptor go into the end of the SAI pipe, you should have a small stub on the metal pipe that it fits on, if not just fit the small filter into the end of the SAI pipe.
cheers, ive had to hacksaw the pipe to enable it to fit and iv cut this stub off i believe, where this sai located if u dont mind :)
It is the pipe that clips onto the std airbox
-
Its a breather filter :wink:
for where tho and what about the blue hose
The blue hose and adaptor go into the end of the SAI pipe, you should have a small stub on the metal pipe that it fits on, if not just fit the small filter into the end of the SAI pipe.
cheers, ive had to hacksaw the pipe to enable it to fit and iv cut this stub off i believe, where this sai located if u dont mind :)
It is the pipe that clips onto the std airbox
i never had any other pipes connected to my std airbox, only the big TIP n MAP pipe, which is now connected to said induction kit
-
You dont have any use for this as you have an AGU engine, without this SAI rediculousness...
-
You dont have any use for this as you have an AGU engine, without this SAI rediculousness...
cheers, rediculousness...??
-
AGU doesnt have all the other non-needed, forever going wrong items VW later added..
New word :laugh:
-
lol love it :), nice too know, cheers, less to worry about then