GolfGTIforum.co.uk

General => The garage => Topic started by: dazzawest1987 on 29 November 2011, 21:14

Title: Wheel fitting advice
Post by: dazzawest1987 on 29 November 2011, 21:14

Hi all really quick question, will 4x100 pcd alloys fit a 4x98 pcd hub with wobble bolts?
Cheers in advance

Title: Re: Wheel fitting advice
Post by: justalex81 on 29 November 2011, 21:16

should do

Title: Re: Wheel fitting advice
Post by: dazzawest1987 on 29 November 2011, 21:49

Cheers mate  :smiley:

Title: Re: Wheel fitting advice
Post by: Jack3559 on 29 November 2011, 22:17

Has someone bought an Alfa?

Title: Re: Wheel fitting advice
Post by: dazzawest1987 on 29 November 2011, 23:04

nah mate, a mate at work has bought a lancia delta and he's looking for a set of multi spokes, found a set for him off a golf or polo, wanted to see if they're a feasible fit without a couple of hundred quids worth of adaptors

Title: Re: Wheel fitting advice
Post by: mcgee9t2 on 29 November 2011, 23:20

wobble bolts should be fine for 2-3mill

Title: Re: Wheel fitting advice
Post by: Wayne on 30 November 2011, 09:32

Wobble bolts allow 2mm of adjustment but check the center bore size as well.

Title: Re: Wheel fitting advice
Post by: lewis1641 on 30 November 2011, 10:28

Quote from: Wayne on 30 November 2011, 09:32

Wobble bolts allow 2mm of adjustment but check the center bore size as well.

delta centre bore is 1mm bigger than vw. if the wheels are aftermarket chances are they have spigot rings that can be knocked out, if not they will need machining.

delta is supposed to be et40, chances are the vw wheels are 35. not cure how sensitive the lancias are to offset changes but i would imagine 5mm wont cause arch issues

Title: Re: Wheel fitting advice
Post by: dvvid1993 on 10 December 2011, 19:55

wobble bolts will work fine they are good for 2.5-4mm usually