GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: gtr32 on 30 October 2011, 02:47

Title: G60 needs help
Post by: gtr32 on 30 October 2011, 02:47
Just bought a G60 today, engine has done 100k miles. some steam come from the engine when opens the oil cap.....drives fine.
someone told me it needs to be rebuilt or engine swap. It really pulls well at the moment. Just wonder does the normal mk2 8v engine fit the go60?
I bought the car for £1500 with mot and tax. Not sure it's a good deal or not.
Also I saw this for sale from Germany, just wonder if it fits the G60.
http://www.ebay.co.uk/itm/110763754795?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Can anyone help?Thanks.
Title: Re: G60 needs help
Post by: pigbladder on 30 October 2011, 08:41
need a bit more info , is it just a bit of steam when its cold out or plumes of smoke all the time

8v gti engine isnt the same a g60 lump

the clocks you posted , its just a bare empty plastic case,
Title: Re: G60 needs help
Post by: Thom89 on 30 October 2011, 11:16
need a bit more info , is it just a bit of steam when its cold out or plumes of smoke all the time

8v gti engine isnt the same a g60 lump

the clocks you posted , its just a bare empty plastic case,

No, its a Digifiz set up :huh:

Thom
Title: Re: G60 needs help
Post by: DOA on 30 October 2011, 11:22
need a bit more info , is it just a bit of steam when its cold out or plumes of smoke all the time

8v gti engine isnt the same a g60 lump

the clocks you posted , its just a bare empty plastic case,

No, its a Digifiz set up :huh:

Thom

If you read the English bit at the bottom its missing the PCB  :wink:
Title: Re: G60 needs help
Post by: Thom89 on 30 October 2011, 11:27
need a bit more info , is it just a bit of steam when its cold out or plumes of smoke all the time

8v gti engine isnt the same a g60 lump

the clocks you posted , its just a bare empty plastic case,

No, its a Digifiz set up :huh:

Thom

If you read the English bit at the bottom its missing the PCB  :wink:

Thought I was missing something :grin: too much Vino last night :smiley:
Yeah, dont buy it :evil:

Thom
Title: Re: G60 needs help
Post by: pigbladder on 30 October 2011, 15:14
yeah like i said its a empty case  :rolleyes:
Title: Re: G60 needs help
Post by: Mr Blue on 30 October 2011, 15:59
is it a LHD G60 or a mk2 thats been converted.?
Title: Re: G60 needs help
Post by: X4MGS on 30 October 2011, 19:42
need a bit more info , is it just a bit of steam when its cold out or plumes of smoke all the time

8v gti engine isnt the same a g60 lump

the clocks you posted , its just a bare empty plastic case,

No, its a Digifiz set up :huh:

Thom

If you read the English bit at the bottom its missing the PCB  :wink:

And you need a lot more than the PCB to mount it... al the brackets and Loom...
Title: Re: G60 needs help
Post by: gtr32 on 30 October 2011, 22:54
It's a LHD G60 fire&ice, I believe it's original. the steam is from inside the engine, can't see any of them when engine is running, only see it if i open the oil cap. Not sure if I got a deal or it's too expensive. it's got all the mots in uk, service book from germany, so the mileage is correct.
Title: Re: G60 needs help
Post by: gtr32 on 30 October 2011, 22:57
I think I'll have to rebuilt the engine. Please can anyone give a idea how much will it cost and which garage does the job better? the supercharger has been rebuilt by G-werk. so the charger does not need rebuilt.
Title: Re: G60 needs help
Post by: Sam on 31 October 2011, 08:14
You have bought a broken g60 for 1.5k? Sell sell sell and spend 3k on a minter rather than spend another 1.5k on a re-build
Title: Re: G60 needs help
Post by: simon99 on 31 October 2011, 14:16
please tell me where i can find a mint genuine g60 for 3k
Title: Re: G60 needs help
Post by: Sam on 31 October 2011, 16:12
please tell me where i can find a mint genuine g60 for 3k

My pants
Title: Re: G60 needs help
Post by: clipperjay on 31 October 2011, 20:52
Mr Bmx has a point and my story goes I could not find a minter anywhere the best I could do was go to Italy buy a reasonable Rallye then spend a second mortgage on it. The QUESTION is should you really be looking for a G60 with shallow pockets. Even minters that get small parts done, cost a fortune by their owners so which ever way you look at it, you will spend money regardless. But if the engine is shot why even pay 1.5K when you are buying a shell which I reckon some Rallye shells have gone for about 2K with new powder coated parts and rust free! on it  :undecided: 
Have you looked abroad and import a working one LOL?
Title: Re: G60 needs help
Post by: cняis on 31 October 2011, 23:44
surely if its driving fine, and there are no horrendous noises coming from the engine, it may be something relatively small causing the issue? Even if it were head gasket failure, its not the end of the world. Man up and fix it  :grin:
Title: Re: G60 needs help
Post by: Simeon on 01 November 2011, 11:05
What do you mean by 'steam coming from inside the engine'? Surely if you're taking the oil cap off whilst it's running then you're just getting oil mist? Before you waste time and money stripping it down, do a compression test and check (and keep an eye on) fluid levels. A full service and tune up would probably benefit too. As said, if it's driving fine, don't jump to hasty conclusions about it being knackered based on a lack of knowledge.
Title: Re: G60 needs help
Post by: gtr32 on 01 November 2011, 22:30
You have bought a broken g60 for 1.5k? Sell sell sell and spend 3k on a minter rather than spend another 1.5k on a re-build
there is some misunderstanding, the car runs perfectly, only I spot the steam when some one checked the oil,it's not the smoke, no funny noise, nothing wrong except the steam. I have no idea what's wrong is it. so I'll check the oil level, coolant and so on every time before I start the engine.
Plus, 3k can't even get you a mint 16V, MINT g60 for 3k? I really don't think so, at least I've been looking for one at least a year, everyday ebay and other web. can't find one at that price.
Mine has G60 personal no.plate, expensive alloy wheels, 100K miles with comperssor rebuilted, and plus it's one of 70 fire&ice g60, I believe it's not a bad deal.
no rust whatsoever, just need bits here and there to make it perfect that's all.
Anyway, I love MK2 GOLFS, G60 is always on my wish list, I thinks it's a history, art, not just a car.
Title: Re: G60 needs help
Post by: gtr32 on 01 November 2011, 22:37
Mr Bmx has a point and my story goes I could not find a minter anywhere the best I could do was go to Italy buy a reasonable Rallye then spend a second mortgage on it. The QUESTION is should you really be looking for a G60 with shallow pockets. Even minters that get small parts done, cost a fortune by their owners so which ever way you look at it, you will spend money regardless. But if the engine is shot why even pay 1.5K when you are buying a shell which I reckon some Rallye shells have gone for about 2K with new powder coated parts and rust free! on it  :undecided: 
Have you looked abroad and import a working one LOL?

I tried Germany and spain.....not Italy,but still, 3k is not enough. Some G60 is for sale around 2k,but you have to go there and pick it up plus other cost(before you see the car), it's added up more than 3k plus a big risk.  Maybe one day I can find a good Rallye or G60 for that price, wish me lucy. Good rallye in uk is between 12k-6k as far as I remember.
Title: Re: G60 needs help
Post by: gtr32 on 01 November 2011, 22:40
surely if its driving fine, and there are no horrendous noises coming from the engine, it may be something relatively small causing the issue? Even if it were head gasket failure, its not the end of the world. Man up and fix it  :grin:
yes, it drives perfectly, gearbox and engine all good. I love it. :smiley: