GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: ReadieeVTS on 18 October 2011, 19:26
-
hey guys i put some JOM coilovers on my 1.8t saturday and since yesterday evening ive been getting a rubbing sound, ive taken a quick look and it seems to be the driveshaft rubbing on the ARB on o/s, how do i overcome this? I was thinking of getting some adjustable droplinks but ive heard good and bad points about them, the only other option is to remove the ARB completely but i dont want it to interfere with the handling...
what are your suggestions?
Cheers Lee
-
adjustable droplinks will still rub u want to get a mk1 audi tt arb which u can use on standerd droplinks as it goes under the drive shaft rather than the standerd going over
-
adjustable droplinks will still rub u want to get a mk1 audi tt arb which u can use on standerd droplinks as it goes under the drive shaft rather than the standerd going over
Thats what i heard about the droplinks so i wasnt too sure about them, does the tt ARB need any form of fabrication to fit?
Lee
-
if u get from dealer should come with the 19mm bushes needed and its a stright fit :smiley:
u could also get polybushed bushes of ebay
-
if u get from dealer should come with the 19mm bushes needed and its a stright fit :smiley:
u could also get polybushed bushes of ebay
Brilliant, ill call up the dealers... Im guessing this is what youve got on yours?
Cheers Lee
-
bought mine of a lad on here mate :smiley:
-
r32 arb is the same i belive? so if you see someone selling an r32 you can use that too, though would defanitly check that first dont buy just on what ive said :D